Insert 5/16" - M16x1.5 nut 08S
Hose insert for assembling a hydraulic hose end connection with a separate ferrule. The fitting has a metric female thread M16x1,5 with a 24° male cone interface and an O-ring seal face, designed for heavy series connections in accordance with DIN 2353 and ISO 12151-2 / ISO 8434-1.
Designed for 5/16" hose size (pipe diameter 8 mm) and suitable for 1–2 layer hoses. Selection is primarily based on hose size, thread size and type (metric female), the 24° cone sealing interface with O-ring, and the key dimensions for installation space: key size 19 mm, C 26 mm and E 19 mm. Surface treatment is electro-galvanized / white chromatized, with NBR sealing material.
Typical Applications
- Hydraulic hose assembly and replacement where a metric 24° cone heavy-series female connection is required
- Hydraulic lines using DIN 2353 / ISO 12151-2 / ISO 8434-1 style connections
Artikelnummer:
4822-08-05
Förpackningsstorlek:
10 pcs
Minsta beställningskvantitet:
1 pcs
C
26 mm
Diameter rör
8 mm
E
19 mm
Gänga metrisk
M16x1,5
Modell kod
0084-05-16
Märke namn
I.M.M Hydraulics
Nyckelstorlek
19 mm
Packningsmaterial
NBR
Serie
S
Slangdimension
5/16 "
Slangkopplingstyp
For separate ferrule
Standard DIN
DIN 2353
Standard ISO
ISO 12151-2, ISO 8434-1
T
M16x1,5
Tillverkningsmaterial
Steel
Vinkel
0 °
Ytskiktbehandling
Electro-galvanized / White chromatized
Åtdragning moment
30 Nm
Förpackningsstorlek
10 pcs
Streckkod
381236
Bruttovikt
0,04 Kg
Nettovikt
0,04 Kg
Ursprungsland
ITA
Intrastat artikelkod
73269098
Hose insert for assembling a hydraulic hose end connection with a separate ferrule. The fitting has a metric female thread M16x1,5 with a 24° male cone interface and an O-ring seal face, designed for heavy series connections in accordance with DIN 2353 and ISO 12151-2 / ISO 8434-1.
Designed for 5/16" hose size (pipe diameter 8 mm) and suitable for 1–2 layer hoses. Selection is primarily based on hose size, thread size and type (metric female), the 24° cone sealing interface with O-ring, and the key dimensions for installation space: key size 19 mm, C 26 mm and E 19 mm. Surface treatment is electro-galvanized / white chromatized, with NBR sealing material.
Typical Applications
- Hydraulic hose assembly and replacement where a metric 24° cone heavy-series female connection is required
- Hydraulic lines using DIN 2353 / ISO 12151-2 / ISO 8434-1 style connections
Copyright © 2026 HydraSpecma