Nettuno FF, 38 MM
Areas of use: Water, juice, wine.
Characteristics: Taste and smell-free PVC-hose for the food industry. The hose can be used down from +10°C and has good flexibility. Used as suction- and pressure hose for mineral water, juice, wine and vinegar and other liquid foods. Do not use this hose for fat and oil containing foods as milk, vegetable oils etc. and stimulants with an alcoholpercentage of more than 20%. Contact HydraSpecma A/S if in doubt. Meets EEC's regulations for materials in contact with food-stuff (EEC 89/109, 90/128, 92/39).
Construction: Extrudet PVC-hose with embedded white PVC-spiral. Inside smooth and outside light corrugated.
Material: Transparent and very elastic PVC with hard white PVC-spiral, being impact-proof and rigid.
The mentioned values for min. bending radius ar at +20°C. Pressure values are measured at +20°C, and are reduced with rising temperature as shown below. Working pressure must be multiplied with the factor according to the needed working temperature:
Temp. °C / Factor: +10°C to +20°C = 1,00. +30°C = 0,85. +40°C = 0,75. +50°C = 0,6. +60°C = 0,5.
Varenummer:
0108044038
Pakke str.:
50 m
Min. bestillingsenhed er:
50 m
Bend radius
180 mm
Brand Name
IPL
Diameter inner
38 mm
Diameter outer
45 mm
Pressure burst min.
12 bar
Pressure max.
4 bar
Temperature max.
+60 °C
Vacuum max.
0.7 bar
Pakke str.
50 m
Stregkode
5704295505640
Brutto vægt
0,52 Kg
Netto vægt
0,52 Kg
Oprindelsesland
ITA
Intrastat varekode
40094100
Areas of use: Water, juice, wine.
Characteristics: Taste and smell-free PVC-hose for the food industry. The hose can be used down from +10°C and has good flexibility. Used as suction- and pressure hose for mineral water, juice, wine and vinegar and other liquid foods. Do not use this hose for fat and oil containing foods as milk, vegetable oils etc. and stimulants with an alcoholpercentage of more than 20%. Contact HydraSpecma A/S if in doubt. Meets EEC's regulations for materials in contact with food-stuff (EEC 89/109, 90/128, 92/39).
Construction: Extrudet PVC-hose with embedded white PVC-spiral. Inside smooth and outside light corrugated.
Material: Transparent and very elastic PVC with hard white PVC-spiral, being impact-proof and rigid.
The mentioned values for min. bending radius ar at +20°C. Pressure values are measured at +20°C, and are reduced with rising temperature as shown below. Working pressure must be multiplied with the factor according to the needed working temperature:
Temp. °C / Factor: +10°C to +20°C = 1,00. +30°C = 0,85. +40°C = 0,75. +50°C = 0,6. +60°C = 0,5.
Copyright © 2025 HydraSpecma