Solenoid Valve 2/2 12l/m NO SV08-22-03-00-00-B-00
Solenoid Valve, Spool Type, 2-Position, 2-Way, Normally Open, Pull-Type. When de-energized, the SV08-22-03 allows flow in both directions. When energized, flow is blocked in both directions. Follow the “Operating Envelope” limits to ensure shifting of the valve during operation.
Applications
These spool-type valves are primarily used in mobile and industrial applications for blocking the flow of a 2-way function, pump unloading or cylinder regeneration. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input.
Spool valves will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve. This valve can operate with an inlet pressure of 315 bar for 400,000 cycles. In case of inlet from port 2 this value can be increased to 600,000 cycles.
Artikelnummer:
83025412
Förpackningsstorlek:
0 pcs
Minsta beställningskvantitet:
1 pcs
Activation
Solenoid
Brand Name
Danfoss
Cavity
SDC08-2
Contamination level max.
20/18/14 - ISO 4406
Filter built-in
No
Flow rate nominal LMin
12 lpm
Manual operated
No
Model code
SV08-22-03-00-00-B-00
Number of ways/positions
2/2
Oil viscocity recommended
12 - 54 cSt
Pressure max.
230 bar
Sealing material
NBR
Solenoidtype
M13 - R13
Temperature max.
+100 °C
Temperature min.
-40 °C
Torque tightening
35 - 40 Nm
Valve type
NO - Normally open
Förpackningsstorlek
0 pcs
Streckkod
5704334465645
Bruttovikt
0,11 Kg
Nettovikt
0,11 Kg
Ursprungsland
ITA
Intrastat artikelkod
85051990
Solenoid Valve, Spool Type, 2-Position, 2-Way, Normally Open, Pull-Type. When de-energized, the SV08-22-03 allows flow in both directions. When energized, flow is blocked in both directions. Follow the “Operating Envelope” limits to ensure shifting of the valve during operation.
Applications
These spool-type valves are primarily used in mobile and industrial applications for blocking the flow of a 2-way function, pump unloading or cylinder regeneration. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input.
Spool valves will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve. This valve can operate with an inlet pressure of 315 bar for 400,000 cycles. In case of inlet from port 2 this value can be increased to 600,000 cycles.
Copyright © 2025 HydraSpecma