Reduction - 3/8" BSP x 1/2" BSP female - WD seal
Thread reducer for adapting between two Whitworth Parallel Pipe Thread connections (BSPP) in hydraulic and fluid power assemblies. The reducer provides a G 3/8 male thread on one side and a G 1/2 female thread on the other, allowing different port sizes to be connected in the same line or component interface.
Sealing is done with a profile sealing ring, using NBR as the sealing material. The steel body has a zinc-nickel plated surface treatment. Key selection parameters include the BSPP thread sizes, maximum pressure 630 bar, operating temperature range -35 to +100, and the installation envelope with total length 41 mm and 30 mm hex for tightening.
Typical Applications
- Reducing or increasing BSPP port size between hydraulic components, hoses, and pipework
- Hydraulic manifolds and assemblies requiring a sealed BSPP male-to-female reducer
Artikelnummer:
RI-38-12ED
Förpackningsstorlek:
25 pcs
Minsta beställningskvantitet:
1 pcs
D2
8 mm
Gänga inv.
G 1/2 BSP
Gänga utv.
G 3/8 BSP
L1
41 mm
L2
20 mm
Längd
41 mm
Modell kod
FI-RED-R3/8-WD-R1/2-B-W3
Märke namn
Stauff
Packningsmaterial
NBR
REACH compliant
Yes
RoHs compliant
Yes
Rostbeständighet
1200 hours salt spray DIN EN ISO 9227
S1
30 mm
Sexkant
30 mm
Säkerhetsfaktor
4
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Thread T1
G 3/8 BSP
Thread T2
G 1/2 BSP
Tillverkningsmaterial
Steel
Totallängd
41 mm
Tryck max.
630 bar
Typ
Long
Vinkel
0 °
Ytskiktbehandling
Zinc-Nickel plated
i
12 mm
Förpackningsstorlek
25 pcs
Streckkod
130522
Bruttovikt
0,12 Kg
Nettovikt
0,12 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two Whitworth Parallel Pipe Thread connections (BSPP) in hydraulic and fluid power assemblies. The reducer provides a G 3/8 male thread on one side and a G 1/2 female thread on the other, allowing different port sizes to be connected in the same line or component interface.
Sealing is done with a profile sealing ring, using NBR as the sealing material. The steel body has a zinc-nickel plated surface treatment. Key selection parameters include the BSPP thread sizes, maximum pressure 630 bar, operating temperature range -35 to +100, and the installation envelope with total length 41 mm and 30 mm hex for tightening.
Typical Applications
- Reducing or increasing BSPP port size between hydraulic components, hoses, and pipework
- Hydraulic manifolds and assemblies requiring a sealed BSPP male-to-female reducer
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma