Trycksensor PPC
The CAN Pressure Sensor-PPC-CAN-P-060 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.
Due their sturdy Stainless-Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Artikelnummer:
PPC-CAN-P-060
Förpackningsstorlek:
1 st
Minsta beställningskvantitet:
1 st
Gänga
G 1/4 BSP
Märke namn
Stauff
Sensor typ
CAN
Temperatur max.
+105 °C
Temperatur min.
-25 °C
Temperatur omgivning max.
+85 °C
Temperatur omgivning min.
-25 °C
Tillverkningsmaterial
Stainless steel
Tryck max.
120 bar
Tryck spräng min.
500 bar
Tryckmätning
0 - 60 Bar
Pakke str.
1 st
Stregkode
356933
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
deu
The CAN Pressure Sensor-PPC-CAN-P-060 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.
Due their sturdy Stainless-Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2026 HydraSpecma