OVERCENTER VALVE VCB06-EN-2-A-00
VCB 06-EN, Overcenter Valve, Standard, Differential Area, Internal Drain, Port 1 Pilot
This is a differential area overcenter valve, which is a pilot assisted relief with a free flow check. With the relief valve set at around 1.3 times the maximum load induced pressure, the valve will prevent flow from taking place between ports 3 and 2. When pilot pressure is applied to port 1, the valve will meter the flow from port 3 to 2 compensating for any change in pilot pressure due to over-running or unstable loads. Free flow takes place from port 2 to port 3 through the check portion of the valve.
These valves are ideal in most applications bringing stability, load holding, and hose failure protection when the valve is mounted onto or into the actuator. The spring chamber is connected to the valve port 2, so any back pressure will increase the pilot pressure required to keep the valve open and the pressure at which the valve will open as a relief valve.
Varenummer:
820202719
Pakke str.:
1 st
Min. bestillingsenhed er:
1 st
Cavity
NCS06/3
Flow Nominel
60 lpm
Forureningsgrad maks.
20/18/14 - ISO 4406
Model kode
VCB06-EN-2-A-00
Mærke navn
Danfoss
Olieviskositet anbefalet
12 - 54 cSt
Pilotforhold
7,1:1
Tilspændingsmoment
44 - 50 Nm
Tryk maks.
350 bar
Trykindstilling maks.
210 bar
Trykindstilling min.
70 bar
Pakke str.
1 st
Stregkode
374732
Brutto vægt
0,30 Kg
Netto vægt
0,30 Kg
Oprindelsesland
Intrastat varekode
84812010
VCB 06-EN, Overcenter Valve, Standard, Differential Area, Internal Drain, Port 1 Pilot
This is a differential area overcenter valve, which is a pilot assisted relief with a free flow check. With the relief valve set at around 1.3 times the maximum load induced pressure, the valve will prevent flow from taking place between ports 3 and 2. When pilot pressure is applied to port 1, the valve will meter the flow from port 3 to 2 compensating for any change in pilot pressure due to over-running or unstable loads. Free flow takes place from port 2 to port 3 through the check portion of the valve.
These valves are ideal in most applications bringing stability, load holding, and hose failure protection when the valve is mounted onto or into the actuator. The spring chamber is connected to the valve port 2, so any back pressure will increase the pilot pressure required to keep the valve open and the pressure at which the valve will open as a relief valve.
Copyright © 2026 HydraSpecma