Red Flexlight hose V9 Dia. 63mm
Areas of use: Cold and hot air, smoke gases, fumes.
Characteristics: A very light and flexible hose for injection and extraction of cold and hot air, smoke gases and fumes. Type V9 are used in places, where both good resistance to heat and cold are nedded and thus it is often used in the aircraft-industry.
Construction: Mandrel-built hose with inside visible steel-spiral, vulkanised to a layer of rubber-covered silicone fabric. Outside with white glass-cord. The hose are light corrugated.
Material: Glass-fabric covered with red silicone-rubber. Spiral of steel. Outside thread of white glass-cord. Silicone has low wear-resistance, and thus the hose must be mounted in such a way, that theres is no wear on its outside.
Partnumber:
0110270063
Package size:
4 st
Min. order quantity is:
4 st
Bend radius
32 mm
Brand Name
Hydraspecma
Diameter inner
63 mm
Length
4 m
Pressure max.
1.3 bar
Temperature max.
+310 °C
Temperature min.
-85 °C
Vacuum max.
0.5 bar
Förpackningsstorlek
4 st
Streckkod
424668
Bruttovikt
1,64 Kg
Nettovikt
1,64 Kg
Ursprungsland
Intrastat artikelkod
39172290
Areas of use: Cold and hot air, smoke gases, fumes.
Characteristics: A very light and flexible hose for injection and extraction of cold and hot air, smoke gases and fumes. Type V9 are used in places, where both good resistance to heat and cold are nedded and thus it is often used in the aircraft-industry.
Construction: Mandrel-built hose with inside visible steel-spiral, vulkanised to a layer of rubber-covered silicone fabric. Outside with white glass-cord. The hose are light corrugated.
Material: Glass-fabric covered with red silicone-rubber. Spiral of steel. Outside thread of white glass-cord. Silicone has low wear-resistance, and thus the hose must be mounted in such a way, that theres is no wear on its outside.
Copyright © 2025 HydraSpecma