XLH 315 Ø25mm SAE-A HPS
The Danfoss XLH series is designed for medium-duty applications requiring reliable low speed and high torque. Built on the proven orbital motor principle with spool valve distribution and hydrodynamic journal bearings, these motors deliver robust performance, long service life, and a compact footprint. With SAE-A2 flange mounting, high-pressure shaft seals, and a choice of cylindrical or splined shafts, XLH motors are well suited for a wide range of mobile and industrial machinery.
Key Advantages
- Reliable performance at low speeds
- Compact and robust construction
- Constant torque in both rotational directions
- Hydrodynamic journal bearings for long life
- High-pressure shaft seal as standard
- Displacement range: 80 to 400 cm³
- Max. continuous torque up to 426 Nm
- Max. intermittent torque up to 547 Nm
- Continuous speed capability up to 462 RPM (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers, sweepers, and mixers
- Conveyors and material handling systems
- Agricultural machinery and implements
- Turf care and landscaping equipment
- Winches, auxiliary drives, and feeders
Technical Highlights
- Inlet pressure up to 150 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: –30 to +82 °C
- Filtration: ISO 4406: 20/18/13
- Port threads: G 1/2 (pressure), G 1/4 (drain)
- Mounting flange: 2-bolt oval A2 flange (Ø82.5 mm pilot, 106.4 mm bolt circle)
- Shaft types: Cylindrical Ø25 mm (torque rating 340 Nm) or SAE 6B spline (torque rating 400 Nm)
- Seal type: High-pressure shaft seal (HPS)
Note: For continuous or high-pressure duty, external case drain lines are recommended to ensure low case pressure and extend shaft seal life. Always verify the correct shaft and seal configuration using the full model code.
Artikelnummer:
016-0551-003
Förpackningsstorlek:
0 pcs
Minsta beställningskvantitet:
1 pcs
Brand Name
Danfoss
Contamination level max.
20/18/13 - ISO 4406
Continuous Flow Max.
57
Continuous rotation max.
174 rpm
Dimension H
179 mm
Displacement
315 cm3
Drainport
G 1/4 BSP
Filtration Requirement
ISO cleanliness code 4406:20/18/13
Flange style diameter
82.5 mm
Holes circle
106.4 mm
Inlet Pressure Max.
150
Integrated check valve
Nej
Intermittent Flow Maks.
68
Intermittent Rotation speed Max.
209
Intermittent Torque Max.
508 Nm
Length
179 mm
Max. operating temperature
82 °C
Model code
XLH
Mounting flange
SAE-A2
Number of mounting holes
2
Oil viscocity recommended
20 - 32 cSt
Paint
Black
Port position
Side
Pressure continous max.
90 bar
Pressure intermittent max.
124 bar
Recess
82,55 mm
Shaft Seal Type
High pressure packing
Shaft diameter
25 mm
Shaft torque rating
340 Nm
Shaft type
Cyl. Ø 25 mm (10)
Temperature max.
+180 °C
Temperature min.
-30 °C
Torque continuous max.
377 Nm
Working ports
G 1/2 BSP
Förpackningsstorlek
0 pcs
Streckkod
5704334982722
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
CHN
Intrastat artikelkod
84122981
The Danfoss XLH series is designed for medium-duty applications requiring reliable low speed and high torque. Built on the proven orbital motor principle with spool valve distribution and hydrodynamic journal bearings, these motors deliver robust performance, long service life, and a compact footprint. With SAE-A2 flange mounting, high-pressure shaft seals, and a choice of cylindrical or splined shafts, XLH motors are well suited for a wide range of mobile and industrial machinery.
Key Advantages
- Reliable performance at low speeds
- Compact and robust construction
- Constant torque in both rotational directions
- Hydrodynamic journal bearings for long life
- High-pressure shaft seal as standard
- Displacement range: 80 to 400 cm³
- Max. continuous torque up to 426 Nm
- Max. intermittent torque up to 547 Nm
- Continuous speed capability up to 462 RPM (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers, sweepers, and mixers
- Conveyors and material handling systems
- Agricultural machinery and implements
- Turf care and landscaping equipment
- Winches, auxiliary drives, and feeders
Technical Highlights
- Inlet pressure up to 150 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: –30 to +82 °C
- Filtration: ISO 4406: 20/18/13
- Port threads: G 1/2 (pressure), G 1/4 (drain)
- Mounting flange: 2-bolt oval A2 flange (Ø82.5 mm pilot, 106.4 mm bolt circle)
- Shaft types: Cylindrical Ø25 mm (torque rating 340 Nm) or SAE 6B spline (torque rating 400 Nm)
- Seal type: High-pressure shaft seal (HPS)
Note: For continuous or high-pressure duty, external case drain lines are recommended to ensure low case pressure and extend shaft seal life. Always verify the correct shaft and seal configuration using the full model code.
Copyright © 2025 HydraSpecma