XLH 125 Ø25.5mm 6B Spline SAE-A HPS
The Danfoss XLH series is designed for medium-duty applications requiring reliable low speed and high torque. Built on the proven orbital motor principle with spool valve distribution and hydrodynamic journal bearings, these motors deliver robust performance, long service life, and a compact footprint. With SAE-A2 flange mounting, high-pressure shaft seals, and a choice of cylindrical or splined shafts, XLH motors are well suited for a wide range of mobile and industrial machinery.
Key Advantages
- Reliable performance at low speeds
- Compact and robust construction
- Constant torque in both rotational directions
- Hydrodynamic journal bearings for long life
- High-pressure shaft seal as standard
- Displacement range: 80 to 400 cm³
- Max. continuous torque up to 426 Nm
- Max. intermittent torque up to 547 Nm
- Continuous speed capability up to 462 RPM (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers, sweepers, and mixers
- Conveyors and material handling systems
- Agricultural machinery and implements
- Turf care and landscaping equipment
- Winches, auxiliary drives, and feeders
Technical Highlights
- Inlet pressure up to 150 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: –30 to +82 °C
- Filtration: ISO 4406: 20/18/13
- Port threads: G 1/2 (pressure), G 1/4 (drain)
- Mounting flange: 2-bolt oval A2 flange (Ø82.5 mm pilot, 106.4 mm bolt circle)
- Shaft types: Cylindrical Ø25 mm (torque rating 340 Nm) or SAE 6B spline (torque rating 400 Nm)
- Seal type: High-pressure shaft seal (HPS)
Note: For continuous or high-pressure duty, external case drain lines are recommended to ensure low case pressure and extend shaft seal life. Always verify the correct shaft and seal configuration using the full model code.
Artikelnummer:
016-0535-003
Förpackningsstorlek:
0 pcs
Minsta beställningskvantitet:
1 pcs
Antal monteringshål
2
Arbetsportar
G 1/2 BSP
Axel diameter
25,4 mm
Axel spline
SAE 6B 1"
Axeltyp
6B spline 7mm extra length
Bultcirkel
106.4 mm
Deplacement
125 cm3
Dimension H
153 mm
Dräneringsport
G 1/4 BSP
Filtreringskrav
ISO cleanliness code 4406:20/18/13
Flänsens styrdiameter
82.5 mm
Färg
Black
Föroreningsgrad max.
20/18/13 - ISO 4406
Ingångstryck Max.
150
Integrerad backventil
Nej
Intermittent Rotationshastighet Max.
551
Intermittent flöde Max.
68
Intermittent vridmoment Max.
223 Nm
Kont. rotation max.
462 rpm
Kontinuerligt flöde Max.
57
Längd
153 mm
Max. driftstemperatur
82 °C
Max. vridmoment på axel
400 Nm
Modell kod
MCH125AA07AA110020A000C00C
Moment kontinuerlig max.
200 Nm
Monteringsfläns
SAE-A2
Märke namn
Danfoss
Oljeviskositet rekommanderad
20 - 32 cSt
Portplacering
Side
Reces
82,55 mm
Temperatur max.
+180 °C
Temperatur min.
-30 °C
Tryck intermittent max.
138 bar
Tryck kontinuerlig max.
124 bar
Typ av axeltätning
High pressure packing
Förpackningsstorlek
0 pcs
Streckkod
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
chn
Intrastat artikelkod
84122981
The Danfoss XLH series is designed for medium-duty applications requiring reliable low speed and high torque. Built on the proven orbital motor principle with spool valve distribution and hydrodynamic journal bearings, these motors deliver robust performance, long service life, and a compact footprint. With SAE-A2 flange mounting, high-pressure shaft seals, and a choice of cylindrical or splined shafts, XLH motors are well suited for a wide range of mobile and industrial machinery.
Key Advantages
- Reliable performance at low speeds
- Compact and robust construction
- Constant torque in both rotational directions
- Hydrodynamic journal bearings for long life
- High-pressure shaft seal as standard
- Displacement range: 80 to 400 cm³
- Max. continuous torque up to 426 Nm
- Max. intermittent torque up to 547 Nm
- Continuous speed capability up to 462 RPM (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Augers, sweepers, and mixers
- Conveyors and material handling systems
- Agricultural machinery and implements
- Turf care and landscaping equipment
- Winches, auxiliary drives, and feeders
Technical Highlights
- Inlet pressure up to 150 bar
- Recommended oil viscosity: 20–32 cSt
- Operating temperature: –30 to +82 °C
- Filtration: ISO 4406: 20/18/13
- Port threads: G 1/2 (pressure), G 1/4 (drain)
- Mounting flange: 2-bolt oval A2 flange (Ø82.5 mm pilot, 106.4 mm bolt circle)
- Shaft types: Cylindrical Ø25 mm (torque rating 340 Nm) or SAE 6B spline (torque rating 400 Nm)
- Seal type: High-pressure shaft seal (HPS)
Note: For continuous or high-pressure duty, external case drain lines are recommended to ensure low case pressure and extend shaft seal life. Always verify the correct shaft and seal configuration using the full model code.
Copyright © 2025 HydraSpecma