3/8" Hydraulic hose TFD - 445 bar - 4SP
Hydraulic high-pressure hose in 4SP construction for conveying hydraulic media in fluid power systems. The hose is designed for applications using mineral oils, glycol-water based fluids, water, and lubricants.
The hose is built with a synthetic rubber inner tube and synthetic rubber cover, and reinforced with 4-layer steel wire braid for pressure capability. For correct routing and installation planning, the hose has a minimum bend radius of 180 mm.
Typical Applications
- High-pressure hydraulic lines where EN 856 4SP / ISO 3862 4SP hose specification is required
- Hydraulic circuits handling mineral oils, glycol-water based fluids, water, or lubricants
Artikelnummer:
4SP-06
Förpackningsstorlek:
1 m
Minsta beställningskvantitet:
1 m
Area of use
Glicol-water based, Lubricants, Mineral oils, Water
Bend radius
180 mm
Brand Name
I.M.M Hydraulics
Cover
Synthetic rubber
Diameter inner
9.5 mm
Diameter outer
21.2 mm
Flameresistant
Yes
Hose size
3/8 "
Hose type
4SP
Hoseapprovals
BV, DNV, MED, MSHA
Pressure burst min.
1780 bar
Pressure max.
445 bar
REACH compliant
Yes
Reinforcement
4 layer steel wire braid
RoHs compliant
Yes
Standard EN
EN 856 4SP
Standard ISO
ISO 3862 4SP
Temperature intermittent max.
+120 °C
Temperature max.
+100 °C
Temperature min.
-40 °C
Tube
Synthetic rubber
Förpackningsstorlek
1 m
Streckkod
219983
Bruttovikt
0,85 Kg
Nettovikt
0,85 Kg
Ursprungsland
ITA
Intrastat artikelkod
40092100
Hydraulic high-pressure hose in 4SP construction for conveying hydraulic media in fluid power systems. The hose is designed for applications using mineral oils, glycol-water based fluids, water, and lubricants.
The hose is built with a synthetic rubber inner tube and synthetic rubber cover, and reinforced with 4-layer steel wire braid for pressure capability. For correct routing and installation planning, the hose has a minimum bend radius of 180 mm.
Typical Applications
- High-pressure hydraulic lines where EN 856 4SP / ISO 3862 4SP hose specification is required
- Hydraulic circuits handling mineral oils, glycol-water based fluids, water, or lubricants
Copyright © 2026 HydraSpecma