Bladder accumulator - 4:1 - 360 bar - 2" BSP - 9.1 LTR
SAIP bladder accumulator (10 L) with replaceable bladder. Suitable for hydraulic systems for pressure compensation, energy storage, and damping of pressure fluctuations. Connection: 2" BSP-P. Gas valve: 5/8" UNF.
Advantages
- Replaceable bladder
- Carbon steel shell with corrosion-resistant coating
- PED-approved (EN 14359, EN 13445-3)
- Suitable for both mobile and stationary systems
Delivered without nitrogen precharge. For precharging, we offer customized solutions – contact our sales department.
Varenummer:
SI1U10
Pakke str.:
1 st
Min. bestillingsenhed er:
1 st
Brand Name
Saip
Connection Thread
G 2
Diameter
219 mm
Dimension A
561 mm
Dimension B
50 mm
Dimension C
106 mm
Dimension CH1
32 mm
Dimension CH2
55 mm
Dimension D
405 mm
Dimension G
71.5 mm
Dimension ØE
219 mm
Dimension ØF
22.5 mm
Dimension øG1
45 mm
Dimension øG2
62 mm
Flow rate max. recommended
900 lpm
Gas valve
5/8" UNF, Plug
Length
561 mm
Material
Carbon steel with epoxy coating (≥75 μm)
Model code
SI.1U.10.1.O.C9.A
Mount
Install vertically, horizontally or at an angle with gas valve upwards
Precharge pressure
2 bar
Pressure difference ratio max.
4:1
Pressure max.
360 bar
Separating Element
NBR (-20 °C to +100 °C)
Temperature max.
+80 °C
Temperature min.
-15 °C
Test Standards
PED 2014/68/EU Cat. IV, EN 14359:2017, EN13445-3:2021
Type
Bladder
Volume
9.1 ltr
Pakke str.
1 st
Stregkode
484874
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
ITA
Intrastat varekode
73110091
SAIP bladder accumulator (10 L) with replaceable bladder. Suitable for hydraulic systems for pressure compensation, energy storage, and damping of pressure fluctuations. Connection: 2" BSP-P. Gas valve: 5/8" UNF.
Advantages
- Replaceable bladder
- Carbon steel shell with corrosion-resistant coating
- PED-approved (EN 14359, EN 13445-3)
- Suitable for both mobile and stationary systems
Delivered without nitrogen precharge. For precharging, we offer customized solutions – contact our sales department.
Copyright © 2025 HydraSpecma