Oil Master Lite SD 3 1/2 Corrugated hose
Areas of use: Petrol, oil, petroleum, grease, paraffin, lubricating oil, water.
Characteristics: Very flexible corrugated vacuum and pressure hose (SD) for transfer of fuel oil and other petroleum based products. Max 50% aromatic content Can also be used for water.
Construction: Mandrel built hose with steel wire helix and two crossing antistatic wires. Electrical discharge through the helix and antistatic wires. Electrical resistance less than 10 MOhm, when couplings are mounted correct onto the hose.
Material: Inside: Black NBR rubber, smooth and oil resistant. Outside: CR rubber, black, corrugated with cloth impression, good resistant to weather and ozone.
Artikelnummer:
OMLSD-90
Förpackningsstorlek:
20 m
Minsta beställningskvantitet:
1 m
Användingsområde
Air, Diesel, Gasoline, Grease, Oil, Water
Böjningsradie
450 mm
Diameter inv.
90 mm
Diameter utv.
104 mm
Elektrisk konduktivitet
R < 10^6 Ohm
Längd
40 m
Märke namn
Gates
REACH compliant
Yes
RoHs compliant
Yes
Slangdimension
3.1/2 "
Temperatur max.
+100 °C
Temperatur min.
-30 °C
Tillverkningsmaterial
CR, NBR
Tryck max.
10 bar
Tryck spräng min.
30 bar
Vakuum max.
0.8 bar
Förpackningsstorlek
20 m
Streckkod
228222
Bruttovikt
3,50 Kg
Nettovikt
3,50 Kg
Ursprungsland
TUR
Intrastat artikelkod
40094100
Areas of use: Petrol, oil, petroleum, grease, paraffin, lubricating oil, water.
Characteristics: Very flexible corrugated vacuum and pressure hose (SD) for transfer of fuel oil and other petroleum based products. Max 50% aromatic content Can also be used for water.
Construction: Mandrel built hose with steel wire helix and two crossing antistatic wires. Electrical discharge through the helix and antistatic wires. Electrical resistance less than 10 MOhm, when couplings are mounted correct onto the hose.
Material: Inside: Black NBR rubber, smooth and oil resistant. Outside: CR rubber, black, corrugated with cloth impression, good resistant to weather and ozone.
Copyright © 2026 HydraSpecma