Pressure Sensor-PPC-CAN-P-600 CAN sensor
The CAN Pressure Sensor-PPC-CAN-P-600 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.
Due their sturdy Stainless-Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Varenummer:
1810010792
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Gevind
G 1/4 BSP
Materiale
Stainless steel
Model kode
PPC-CRN-P-600
Mærke navn
Stauff
Sensor type
CAN
Temperatur maks.
+105 °C
Temperatur min.
-25 °C
Temperatur omgivelse maks.
+85 °C
Temperatur omgivelse min.
-25 °C
Tryk maks.
1200 bar
Tryk sprængning min.
1800 bar
Trykmåling
0 - 600 Bar
Pakke str.
0 pcs
Stregkode
5704334849636
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
deu
Intrastat varekode
90262040
The CAN Pressure Sensor-PPC-CAN-P-600 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.
Due their sturdy Stainless-Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2026 HydraSpecma