3/4" Insert - (25S) M36x2 female - 45°
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female end helps route the hose connection where a straight fitting would be difficult due to space or hose routing.
Specified for 3/4" hose and supplied with an M36x2 female thread interface. Selection is primarily based on hose size, required thread, and the 45° bend angle in the connection point.
Typical Applications
- Hydraulic hose assemblies where an angled threaded connection is required
- Hose routing in confined installations requiring a 45° connection orientation
Osanumero:
12GS25FDHORX45
Pakkauskoko:
1 pcs
Pienin tilausmäärä on:
1 pcs
A
137,3 mm
B
86,3 mm
D
3/4"
DN
20
E
31,2 mm
H
46 mm
Kierre sisä
M36x2
Kiristysmomentti
125 - 135 Nm
Korroosionkestävyys
500 hours salt spray ASTM B-117
Kulma
45 °
Letkun kytkentätyyppi
For separate ferrule
Letkunhalkaisija sis.
3/4 "
Lämpötila max.
+100 °C
Lämpötila min.
-35 °C
Mallikoodi
12GS-25FDHORX45
Materiaali
Steel
Pinta
TuffCoat™
Putken halkaisija
25 mm
REACH yhteensopiva
Yes
RoHS yhteensopiva
Yes
Sarja
S
Tiivistysmateriaali
NBR
Tuotemerkit
Gates
Pakkauskoko
1 pcs
Viivakoodi
200357
Bruttopaino
0,53 Kg
Nettopaino
0,53 Kg
Alkuperämaa
CZE
Intrastat-koodi
73269098
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female end helps route the hose connection where a straight fitting would be difficult due to space or hose routing.
Specified for 3/4" hose and supplied with an M36x2 female thread interface. Selection is primarily based on hose size, required thread, and the 45° bend angle in the connection point.
Typical Applications
- Hydraulic hose assemblies where an angled threaded connection is required
- Hose routing in confined installations requiring a 45° connection orientation
Copyright © 2026 HydraSpecma