Reduction - 1/4" BSP x 1/8" BSP female - WD seal
Thread reducer for adapting between two Whitworth parallel pipe threads (BSPP), with an outer thread G 1/4 on one side and an inner thread G 1/8 on the other. Used to connect components with different BSPP port sizes in hydraulic pipework, manifolds, and assemblies.
Sealing is via a profile sealing ring in NBR, and the body is steel with zinc-nickel plating. The compact overall length of 29 mm supports use where installation space is limited. Rated for a maximum operating pressure of 630 bar and a temperature range of -35 to +100 °C.
Typical Applications
- Adapting between G 1/4 and G 1/8 BSPP ports in hydraulic lines and valve blocks
- Thread size reduction in hydraulic manifolds and compact hydraulic assemblies
Artikelnummer:
RI1/4WD1/8
Förpackningsstorlek:
0 pcs
Minsta beställningskvantitet:
1 pcs
D2
5 mm
Gänga inv.
G 1/8 BSP
Gänga utv.
G 1/4 BSP
L1
29 mm
L2
12 mm
Längd
29 mm
Modell kod
FI-RED-R1/4-WD-R1/8-B-W3
Märke namn
Stauff
Packningsmaterial
NBR
REACH compliant
Yes
RoHs compliant
Yes
Rostbeständighet
1200 hours salt spray DIN EN ISO 9227
S1
19 mm
Sexkant
19 mm
Säkerhetsfaktor
4
Temperatur max.
+100 °C
Temperatur min.
-35 °C
Thread T1
G 1/4 BSP
Thread T2
G 1/8 BSP
Tillverkningsmaterial
Steel
Totallängd
29 mm
Tryck max.
630 bar
Typ
Long
Vinkel
0 °
Ytskiktbehandling
Zinc-Nickel plated
i
12 mm
Förpackningsstorlek
0 pcs
Streckkod
5704295277011
Bruttovikt
0,04 Kg
Nettovikt
0,04 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Thread reducer for adapting between two Whitworth parallel pipe threads (BSPP), with an outer thread G 1/4 on one side and an inner thread G 1/8 on the other. Used to connect components with different BSPP port sizes in hydraulic pipework, manifolds, and assemblies.
Sealing is via a profile sealing ring in NBR, and the body is steel with zinc-nickel plating. The compact overall length of 29 mm supports use where installation space is limited. Rated for a maximum operating pressure of 630 bar and a temperature range of -35 to +100 °C.
Typical Applications
- Adapting between G 1/4 and G 1/8 BSPP ports in hydraulic lines and valve blocks
- Thread size reduction in hydraulic manifolds and compact hydraulic assemblies
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma