08MEUP12 closing plug M12x1,5m
Closing plug for sealing an unused hydraulic port with a metric parallel male thread. The plug seals with an NBR profile sealing ring and is tightened via an internal hex drive.
Selection is mainly based on the thread size and the sealing type. The zinc-nickel plated steel design supports use in hydraulic systems where a defined pressure rating and corrosion resistance are required.
Typical Applications
- Blanking off unused ports in hydraulic components and manifolds
- Temporary or permanent port sealing during system build, testing, or service
Osanumero:
138-M12X1.5
Pakkauskoko:
250 pcs
Pienin tilausmäärä on:
1 pcs
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
D1
17 mm
L1
17,3 mm
Material
Steel
Model code
VSCHM1215WZN
Pressure max.
400 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
6 mm
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
T
M12x1,5
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread outer metric
M12x1,5
Torque tightening
23 Nm
i
12 mm
Förpackningsstorlek
250 pcs
Streckkod
385535
Bruttovikt
0,01 Kg
Nettovikt
0,01 Kg
Ursprungsland
DEU
Intrastat artikelkod
73071110
Closing plug for sealing an unused hydraulic port with a metric parallel male thread. The plug seals with an NBR profile sealing ring and is tightened via an internal hex drive.
Selection is mainly based on the thread size and the sealing type. The zinc-nickel plated steel design supports use in hydraulic systems where a defined pressure rating and corrosion resistance are required.
Typical Applications
- Blanking off unused ports in hydraulic components and manifolds
- Temporary or permanent port sealing during system build, testing, or service
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma