Solenoid Valve 2/2 NC 80 L/min 230 Bar Manual override
This is a 2-way, 2-position, poppet type, pilot operated, normally closed solenoid valve. In its de-energized condition, flow passes from port 1 to 2 but is blocked in the opposite direction. When energized, flow passes from port 2 to 1 and from 1 to 2. Some models have the option of a filter at port 2.
Due to the low leakage provided by the poppet design, these valves can be used to hold loads in position or to interrupt a pressure line where flow normally passes in both directions.
Osanumero:
83019713
Pakkauskoko:
1 st
Pienin tilausmäärä on:
1 st
Aktivointityyppi
Solenoid
Kiristysmomentti
45 - 50 Nm
Käsikäyttöinen
No
Lämpötila max.
+100 °C
Lämpötila min.
-40 °C
Magneettipuola
M16
Mallikoodi
SVP10-NCR-00-00-M-B-00
Paine max.
230 bar
Poraus
SDC10-2
Portit/asennot
2/2
Puhtaustaso min.
20/18/14 - ISO 4406
Suodatin sisäänrakennettu
No
Tiivistysmateriaali
NBR
Tilavuusvirta nimellinen l/min
80 lpm
Tuotemerkit
Danfoss
Venttiilimalli
NC - Normally closed
Öljyn viskositeetti suositus
12 - 54 cSt
Pakkauskoko
1 st
Viivakoodi
451743
Bruttopaino
Kg
Nettopaino
Kg
Alkuperämaa
ita
Intrastat-koodi
84812010
This is a 2-way, 2-position, poppet type, pilot operated, normally closed solenoid valve. In its de-energized condition, flow passes from port 1 to 2 but is blocked in the opposite direction. When energized, flow passes from port 2 to 1 and from 1 to 2. Some models have the option of a filter at port 2.
Due to the low leakage provided by the poppet design, these valves can be used to hold loads in position or to interrupt a pressure line where flow normally passes in both directions.
Copyright © 2026 HydraSpecma