Reduction - 3/4"BSP x 1/4"BSP female - WD seal
Reducing adapter for hydraulic and fluid power connections, used to adapt between two BSPP (Whitworth parallel) thread sizes. One side has a G 3/4 male thread and the other side has a G 1/4 female thread.
The connection uses a WD profile sealing ring in NBR to seal the joint. The body is zinc-nickel plated steel and is specified for up to 400 bar within a temperature range of -35 to +100 °C.
Typical Applications
- Reducing BSPP threaded ports and components to a smaller connection size in hydraulic lines
- Service and repair where a G 3/4 port must be adapted to a G 1/4 connection
Varenummer:
RI-34-14ED
Pakkestr.:
1 pcs
Min. bestillingsmengde er:
1 pcs
Angle
0 °
Brand Name
Stauff
Corrosion resistance
1200 hours salt spray DIN EN ISO 9227
Diameter pipe
0 mm
Hexagon
32 mm
L1
26 mm
L2
12,5 mm
Length
26 mm
Material
Steel
Model code
FI-RED-R3/4-WD-R1/4-B-W3
Pressure max.
400 bar
REACH compliant
Yes
RoHs compliant
Yes
S1
32 mm
Safety factor
4
Sealing material
NBR
Surface treatment
Zinc-Nickel plated
Temperature max.
+100 °C
Temperature min.
-35 °C
Thread T1
G 3/4 BSP
Thread T2
G 1/4 BSP
Thread inner
G 1/4 BSP
Thread outer
G 3/4 BSP
Total length
26 mm
Type
Short
i
16 mm
Pakkestr.
1 pcs
Strekkode
130515
Bruttovekt
0,10 Kg
Nettovekt
0,10 Kg
Opprinnelsesland
DEU
Intrastat produktkode
73071110
Reducing adapter for hydraulic and fluid power connections, used to adapt between two BSPP (Whitworth parallel) thread sizes. One side has a G 3/4 male thread and the other side has a G 1/4 female thread.
The connection uses a WD profile sealing ring in NBR to seal the joint. The body is zinc-nickel plated steel and is specified for up to 400 bar within a temperature range of -35 to +100 °C.
Typical Applications
- Reducing BSPP threaded ports and components to a smaller connection size in hydraulic lines
- Service and repair where a G 3/4 port must be adapted to a G 1/4 connection
Merk: Å åpne 3D-filer krever et program som stotter filformatet
Copyright © 2026 HydraSpecma