Solenoid cartridge valve NC. 30lpm 250bar
The DSL102C, 2-way spool valve are used in circuits requiring flow to be blocked in both directions and/or flow to pass in both directions.
In the de-energized mode, the spool is positioned by spring force. The solenoid, when energized, directly shifts the spool against the spring, thus opening a normally closed valve
Features
- High flow capacity with reduced space requirements
- Standard valve bodies and common cavities
- One-piece encapsulated coil with minimal amperage draw
- Manual overrides, seal variations and other options available
- No dynamic seals
- Variety of coil terminations
Varenummer:
DSL102C
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Aktivering
Solenoid
Antal veje/positioner
2/2
Cavity
CAV04-2 (10-2)
Filter indbygget
No
Flow Nominel
30 lpm
Forureningsgrad maks.
18/16/13 - ISO 4406
Magnetspoletype
CAP
Manuel betjening
No
Mærke navn
Hydraspecma
Olieviskositet anbefalet
15 - 50 cSt
Pakningsmateriale
NBR
Temperatur maks.
+121 °C
Temperatur min.
-34 °C
Tilspændingsmoment
22 Nm
Tryk maks.
210 bar
Ventiltype
NC - Normally closed
Förpackningsstorlek
0 pcs
Streckkod
5704334224099
Bruttovikt
0,18 Kg
Nettovikt
0,18 Kg
Ursprungsland
USA
Intrastat artikelkod
84812010
The DSL102C, 2-way spool valve are used in circuits requiring flow to be blocked in both directions and/or flow to pass in both directions.
In the de-energized mode, the spool is positioned by spring force. The solenoid, when energized, directly shifts the spool against the spring, thus opening a normally closed valve
Features
- High flow capacity with reduced space requirements
- Standard valve bodies and common cavities
- One-piece encapsulated coil with minimal amperage draw
- Manual overrides, seal variations and other options available
- No dynamic seals
- Variety of coil terminations
Copyright © 2025 HydraSpecma