Bulkhead elbow, 45°
45° bulkhead elbow adapter for routing hydraulic lines through a panel or bulkhead while changing direction. The fitting has JIC male connections on both ends and is designed for 37° flared tube connector systems.
Selection is primarily based on tube size and JIC thread. This version is sized for 32 mm tube and uses 1.5/8-12 JIC threads on both connections. The electro-galvanized, white chromatized surface treatment and verified corrosion resistance support use in demanding environments.
Typical Applications
- Bulkhead/panel pass-through connections where a 45° change of line direction is required
- Hydraulic pipe and hose installations using 37° flared tube (JIC) connections
Varenummer:
VUP-32
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Angle
45 °
B
40,5 mm
Brand Name
FOR
C
67 mm
CH
50 mm
Corrosion resistance
1400 hours salt spray DIN EN ISO 9227
D
44 mm
Diameter pipe
32 mm
J
1.5/8-12 JIC
J1
1.5/8-12 JIC
Material
Steel
Pressure max.
240 bar
Surface treatment
Electro-galvanized / White chromatized
T
32 mm
T1
32 mm
Thread outer
1.5/8-12 JIC
Förpackningsstorlek
0 pcs
Streckkod
5704295979588
Bruttovikt
0,92 Kg
Nettovikt
0,92 Kg
Ursprungsland
ITA
Intrastat artikelkod
73071110
45° bulkhead elbow adapter for routing hydraulic lines through a panel or bulkhead while changing direction. The fitting has JIC male connections on both ends and is designed for 37° flared tube connector systems.
Selection is primarily based on tube size and JIC thread. This version is sized for 32 mm tube and uses 1.5/8-12 JIC threads on both connections. The electro-galvanized, white chromatized surface treatment and verified corrosion resistance support use in demanding environments.
Typical Applications
- Bulkhead/panel pass-through connections where a 45° change of line direction is required
- Hydraulic pipe and hose installations using 37° flared tube (JIC) connections
Obs: För att öppna 3D-filer krävs ett program som stöder filformatet
Copyright © 2026 HydraSpecma