Solenoid Valve 2/2 12l/m NO SV08-22-03-00-00-B-00
Solenoid Valve, Spool Type, 2-Position, 2-Way, Normally Open, Pull-Type. When de-energized, the SV08-22-03 allows flow in both directions. When energized, flow is blocked in both directions. Follow the “Operating Envelope” limits to ensure shifting of the valve during operation.
Applications
These spool-type valves are primarily used in mobile and industrial applications for blocking the flow of a 2-way function, pump unloading or cylinder regeneration. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input.
Spool valves will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve. This valve can operate with an inlet pressure of 315 bar for 400,000 cycles. In case of inlet from port 2 this value can be increased to 600,000 cycles.
Partnumber:
83025412
Package size:
0 pcs
Min. order quantity is:
1 pcs
Aktivering
Solenoid
Antal veje/positioner
2/2
Cavity
SDC08-2
Filter indbygget
No
Flow Nominel
12 lpm
Forureningsgrad maks.
20/18/14 - ISO 4406
Magnetspoletype
M13 - R13
Manuel betjening
No
Model kode
SV08-22-03-00-00-B-00
Mærke navn
Danfoss
Olieviskositet anbefalet
12 - 54 cSt
Pakningsmateriale
NBR
Temperatur maks.
+100 °C
Temperatur min.
-40 °C
Tilspændingsmoment
35 - 40 Nm
Tryk maks.
230 bar
Ventiltype
NO - Normally open
Package size
0 pcs
Barcode
5704334465645
Gross weight
0,11 Kg
Net weight
0,11 Kg
Country of origin
ITA
Intrastat code
85051990
Solenoid Valve, Spool Type, 2-Position, 2-Way, Normally Open, Pull-Type. When de-energized, the SV08-22-03 allows flow in both directions. When energized, flow is blocked in both directions. Follow the “Operating Envelope” limits to ensure shifting of the valve during operation.
Applications
These spool-type valves are primarily used in mobile and industrial applications for blocking the flow of a 2-way function, pump unloading or cylinder regeneration. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input.
Spool valves will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve. This valve can operate with an inlet pressure of 315 bar for 400,000 cycles. In case of inlet from port 2 this value can be increased to 600,000 cycles.
Copyright © 2026 HydraSpecma