Press.comp Flow Cont. valve 50l/m (3-10l/m) VRC 06-E-2.00-00

This is a partially adjustable, priority type, pressure compensated flow control valve, where the flow from port 3 will remain constant regardless of the pressure difference across the valve, while excess flow passes from port 1 to 2.

Flow enters at port 1 and passes across a fixed orifice in the spool, which creates a pressure drop. This causes the spool to move back against the spring, which then restricts the outlet flow. Port 1 then opens to port 2 to allow excess flow to pass. The regulated flow will always take priority and remains constant if the working pressure is higher in either port 2 or port 3.

Varenummer:
820104219

Pakke str.:
0 pcs

Min. bestillingsenhed er:
1 pcs
LINE BODY, NCS 06/3 SE 1/2 NCS06/3--SE 1/2
Varenummer: 922500713
LINE BODY, NCS 06/3 SE 3/8 (D) NCS06/3-SE 3/8 (D)
Varenummer: 922500813
LINE BODY, NCS 06/3 SI 3/8 NCS06/3--SI 3/8
Varenummer: 922501113
Ventilhus Comatrol NCS06/3--SI 1/2
Varenummer: 922501213
Ventilhus Comatrol NCS06/3-DL 3/8
Varenummer: 922501313
Ventilhus Comatrol NCS06/3-SEL 3/8
Varenummer: 922503913
SEAL KIT NCS 06 3 VIE VITON #
Varenummer: 230000110
Brand Name
Danfoss

Cavity
NCS06/3

Contamination level max.
20/18/14 - ISO 4406

Flow max. regulated
10 lpm

Flow min. regulated
3 lpm

Flow rate nominal LMin
30 lpm

Inlet flow max.
50 lpm

Model code
VRC06-E-2.00-00

Oil viscocity recommended
12 - 54 cSt

Pressure compensated
Yes

Pressure max.
315 bar

Temperature max.
+100 °C

Temperature min.
-40 °C

Torque tightening
45 - 50 Nm
Pakke str.
0 pcs

Stregkode
5704334467977

Brutto vægt
0,21 Kg

Netto vægt
0,21 Kg

Oprindelsesland
ITA

Intrastat varekode
84812010

This is a partially adjustable, priority type, pressure compensated flow control valve, where the flow from port 3 will remain constant regardless of the pressure difference across the valve, while excess flow passes from port 1 to 2.

Flow enters at port 1 and passes across a fixed orifice in the spool, which creates a pressure drop. This causes the spool to move back against the spring, which then restricts the outlet flow. Port 1 then opens to port 2 to allow excess flow to pass. The regulated flow will always take priority and remains constant if the working pressure is higher in either port 2 or port 3.