1" Hydraulic hose SPT-216CH - 2SC WP 210 bar

Hydraulic hose in 1" size for conveying hydraulic media in pressurised systems. The 2SC construction with 2-layer high tensile steel wire braid is intended for hydraulic lines where pressure capability and controlled flexibility are required.

The hose has an NBR (Nitrile) inner tube and a synthetic rubber cover. Rated working pressure is 210 bar with minimum burst pressure 840 bar. The specified bend radius of 160 mm supports routing in installations with limited space.

Typical Applications
  • Hydraulic lines for oil, diesel and grease
  • Pressure and return lines in hydraulic systems built to EN 857 2SC / ISO 11237 2SC

Artikelnummer:
SPT216CH

Förpackningsstorlek:
350 m

Minsta beställningskvantitet:
1 m
Användingsområde
Diesel, Grease, Oil

Armering
2 layer high tensile steel wire braid

Bestillingsenhed
Single hose

Böjningsradie
160 mm

Diameter inv.
25.5 mm

Diameter utv.
35.8 mm

Flamresistent
Yes

Innertub
NBR (Nitrile)

Märke namn
Hydraspecma

REACH compliant
Yes

RoHs compliant
Yes

Slang godkännanden
ABS, BV, CCS, DNV, KR, LLOYD, MED, NKK, RINA

Slangdimension
1 "

Slangtyp
2SC

Standard EN
EN 857 2SC

Standard ISO
ISO 11237 2SC

Temperatur intermittent max.
+135 °C

Temperatur max.
+120 °C

Temperatur min.
-40 °C

Tryck max.
210 bar

Tryck spräng min.
840 bar

Yttertub
Synthetic rubber
Pakkauskoko
350 m

Viivakoodi
421699

Bruttopaino
0,28 Kg

Nettopaino
0,28 Kg

Alkuperämaa
ITA

Intrastat-koodi
40092100

Hydraulic hose in 1" size for conveying hydraulic media in pressurised systems. The 2SC construction with 2-layer high tensile steel wire braid is intended for hydraulic lines where pressure capability and controlled flexibility are required.

The hose has an NBR (Nitrile) inner tube and a synthetic rubber cover. Rated working pressure is 210 bar with minimum burst pressure 840 bar. The specified bend radius of 160 mm supports routing in installations with limited space.

Typical Applications
  • Hydraulic lines for oil, diesel and grease
  • Pressure and return lines in hydraulic systems built to EN 857 2SC / ISO 11237 2SC