S665-10-45U bulkhead elbow
45° bulkhead elbow for connecting two JIC 37° flare male interfaces through a panel or bulkhead. The 45° bend helps route hydraulic lines where space is limited or where a change of direction is needed at the bulkhead connection.
The adapter uses 9/16-18 JIC male threads on both ends and is sized for 10 mm tube/pipe. An electro-galvanized, white chromatized surface treatment is specified, and the maximum working pressure is 350 bar.
Typical Applications
- Bulkhead/panel pass-through connections in hydraulic piping or hose installations
- Line routing where a 45° change of direction is required at the connection point
Varenummer:
VUP-10
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
B
21 mm
C
42,5 mm
CH
22 mm
D
30 mm
Diameter rør
10 mm
Gevind udvendig
9/16-18 JIC
J
9/16-18 JIC
J1
9/16-18 JIC
Korrosions resistens
1400 hours salt spray DIN EN ISO 9227
Materiale
Steel
Mærke navn
FOR
Overfladebehandling
Electro-galvanized / White chromatized
T
10 mm
T1
10 mm
Tryk maks.
350 bar
Vinkel
45 °
Pakke str.
0 pcs
Stregkode
5704295979533
Brutto vægt
0,06 Kg
Netto vægt
0,06 Kg
Oprindelsesland
ITA
Intrastat varekode
73071110
45° bulkhead elbow for connecting two JIC 37° flare male interfaces through a panel or bulkhead. The 45° bend helps route hydraulic lines where space is limited or where a change of direction is needed at the bulkhead connection.
The adapter uses 9/16-18 JIC male threads on both ends and is sized for 10 mm tube/pipe. An electro-galvanized, white chromatized surface treatment is specified, and the maximum working pressure is 350 bar.
Typical Applications
- Bulkhead/panel pass-through connections in hydraulic piping or hose installations
- Line routing where a 45° change of direction is required at the connection point
Bemærk: Åbning af 3D-filer kræver et program der understøtter fil-formatet
Copyright © 2026 HydraSpecma