Tryck & tempsensor PT
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-400 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Varenummer:
1810000334
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Gevind
G 1/2 BSP
Materiale
Stainless steel
Sensor type
CAN
Temperatur maks.
+105 °C
Temperatur min.
-25 °C
Temperatur omgivelse maks.
+85 °C
Temperatur omgivelse min.
-25 °C
Tryk maks.
800 bar
Tryk sprængning min.
1200 bar
Trykmåling
0-400 Bar
Pakke str.
0 pcs
Stregkode
5715803529621
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
deu
The CAN Pressure / Temperature Sensor-PPC-CAN-PT-400 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.
Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2025 HydraSpecma