Pressure Sensor-PPC-CAN-P-600 CAN sensor
The CAN Pressure Sensor-PPC-CAN-P-600 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.
Due their sturdy Stainless-Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Partnumber:
1810010792
Package size:
0 pcs
Min. order quantity is:
1 pcs
Brand Name
Stauff
Field of application
Neutral gases and liquids
Material
Stainless steel
Material quality
1.4301 / AISI304
Model code
PPC-CRN-P-600
Number of connectorpins
5
Pressure Measurement Bar
0 - 600 Bar
Pressure burst min.
1800 bar
Pressure max.
1200 bar
Pressure measurement accuracy
±0,5% FS
Protection class
IP 67
Sealing material
FKM/FPM (Viton®)
Sensor type
CAN
Temperature ambient max.
+85 °C
Temperature ambient min.
-25 °C
Temperature max.
+105 °C
Temperature min.
-25 °C
Temperature storage max.
+85
Temperature storage min.
-25
Thread
G 1/4 BSP
Vibration and shock
IEC 60068-2-6 (20 g) / IEC 60068-2-27 (50 g)
Package size
0 pcs
Barcode
5704334849636
Gross weight
Kg
Net weight
Kg
Country of origin
deu
Intrastat code
90262040
The CAN Pressure Sensor-PPC-CAN-P-600 are specially designed for use with the CAN Hydraulic Testers. These sensors are using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the analogue Pressure Sensors.
Due their sturdy Stainless-Steel design, the quick response times (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the CAN Pressure Sensors are a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.
Connecting the CAN Pressure Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.
Copyright © 2026 HydraSpecma