Tryck & tempsensor PT

The CAN Pressure / Temperature Sensor-PPC-CAN-PT-060 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.

 

Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.

 

Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.

 

Partnumber:
1810000330

Package size:
0 pcs

Min. order quantity is:
1 pcs
Material
Stainless steel

Pressure Measurement Bar
0-60 Bar

Pressure burst min.
500 bar

Pressure max.
120 bar

Sensor type
CAN

Temperature ambient max.
+85 °C

Temperature ambient min.
-25 °C

Temperature max.
+105 °C

Temperature min.
-25 °C

Thread
G 1/2 BSP
Package size
0 pcs

Barcode
5715803529584

Gross weight
Kg

Net weight
Kg

Country of origin
deu

The CAN Pressure / Temperature Sensor-PPC-CAN-PT-060 are specially designed for use with the CAN Hydraulic Testers. This sensor is using the CANopen protocol to transfer the measurement values to the CAN Hydraulic Testers. Most technical details are the same as with the Pressure / Temperature Sensor-PPC-04/12-PT. The CAN sensor is able to measure and display temperatures on the CAN Hydraulic Testers.

 

Due the sturdy Stainless-Steel design, the quick response time (< 1 ms) and the high accuracy (±0,25% FS* typ.) with automatic sensor recognition, the pressure / temperature sensor is a reliable and flexible solution for the CAN Hydraulic Tester. The status of the sensor is indicated via LED.

 

Connecting the CAN Pressure / Temperature Sensor to the CAN Hydraulic Tester a CAN Connection Cable and a CAN Terminating Resistor is needed.