3/8" Hydraulic hose TFD - 445 bar - 4SP
Hydraulic hose for high-pressure fluid transfer in hydraulic systems. The hose is built as a 4SP type with steel wire reinforcement and is designed for use with mineral oils, water, glycol-water based fluids, and lubricants.
Supplied as hose by the metre, suitable for hose assemblies where a compact outside diameter and defined bend radius are important selection factors. The synthetic rubber tube and cover support hydraulic media handling, and the hose is flame resistant for applications where this characteristic is required.
Typical Applications
- High-pressure hydraulic lines for transfer of hydraulic fluids and lubricants
- Hydraulic circuits where a 3/8" (9.5 mm) bore and EN 856 4SP / ISO 3862 4SP hose specification is required
Partnumber:
4SP-06
Package size:
1 m
Min. order quantity is:
1 m
Area of use
Glicol-water based, Lubricants, Mineral oils, Water
Bend radius
180 mm
Brand Name
I.M.M Hydraulics
Cover
Synthetic rubber
Diameter inner
9.5 mm
Diameter outer
21.2 mm
Flameresistant
Yes
Hose size
3/8 "
Hose type
4SP
Hoseapprovals
BV, DNV, MED, MSHA
Pressure burst min.
1780 bar
Pressure max.
445 bar
REACH compliant
Yes
Reinforcement
4 layer steel wire braid
RoHs compliant
Yes
Standard EN
EN 856 4SP
Standard ISO
ISO 3862 4SP
Temperature intermittent max.
+120 °C
Temperature max.
+100 °C
Temperature min.
-40 °C
Tube
Synthetic rubber
Package size
1 m
Barcode
219983
Gross weight
0,85 Kg
Net weight
0,85 Kg
Country of origin
ITA
Intrastat code
40092100
Hydraulic hose for high-pressure fluid transfer in hydraulic systems. The hose is built as a 4SP type with steel wire reinforcement and is designed for use with mineral oils, water, glycol-water based fluids, and lubricants.
Supplied as hose by the metre, suitable for hose assemblies where a compact outside diameter and defined bend radius are important selection factors. The synthetic rubber tube and cover support hydraulic media handling, and the hose is flame resistant for applications where this characteristic is required.
Typical Applications
- High-pressure hydraulic lines for transfer of hydraulic fluids and lubricants
- Hydraulic circuits where a 3/8" (9.5 mm) bore and EN 856 4SP / ISO 3862 4SP hose specification is required
Copyright © 2026 HydraSpecma