Kenneth Søndergård
Sales Engineer, IAM/OEM Danmark
HYDRA DRIVE SYSTEM IS AVAILABLE IN TWO SIZES:
HDS 2550 & HDS 3000
The axle and the operating system are developed by HydraSpecma and is designed to withstand harsh working environments and with focus on user-friendliness.
The system is delivered with a complete axle with an integral differential lock, drum brakes, hydraulic motor and electronic control system based on Danfoss PLUS+1® platform.
Hydra Drive System is available in two sizes: HDS 2550 and HDS 3000.
- HDS 2550 is typically used for: forestry-, hook lift-, construction- and agricultural trailers.
Overall width: 2550 mm. Suitable for tyres from 1 meter to 1.5 meters. - HDS 3000 is typically used for: large trailers and slurry tankers.
Overall width: 3000 mm. Suitable for tyres from 1.5 meters to 2 meters.
The system's efficiency is significantly higher compared to other assisted drive systems, resulting in up to a 25% power saving from the tractor.
HYDRA DRIVE SYSTEM
OPERATING SYSTEM
Together with the Hydra Drive System you get an operating system developed by HydraSpecma and based on Danfoss PLUS+1® platform.
The operating system is now available in two different variants – as a control unit or as a touchscreen.
The operation of the hydraulic assisted drive axle is managed via a simple CAN-bus control unit directly connected to the ISOBUS service socket in the tractor.
The system can run in either AUTO or MANUAL mode.
Fully automatic operation requires an ISOBUS connection.
When the AUTO mode is activated, HDS automatically synchronises with the tractor's forward and reverse movements, braking function, and working area.
When switching tractors, the Hydra Drive System (HDS) is easily calibrated to fully utilise the tractor's flow capacity.
Copyright © 2026 HydraSpecma