Overcenterventil SUN T-24A

Vented, balanced, load control valve

Vented, balanced load control valves combine a balanced modulating element with a reverse flow check. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while the pilot to open modulating element controls flow from port 1 to port 2. Pilot pressure at port 3 determines the flow setting. Backpressure at port 2 does not affect the flow setting because the spring chamber references the vent (port 4).

  • This valve has no relief function. Not even thermal expansion relief.
  • Maximum valve leakage at reseat for this valve configuration is 5 drops/min. (0,3 cc/min.) at 14 bar below cracking pressure
  • This valve is balanced against load pressures and therefore exhibits self-compensation. Flow is controlled by the pilot pressure. Because of dynamic seals, performance is best in the meter out mode with port 1 being the load and port 2 being tank.
  • All 4-port counterbalance, load control, and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size).
  • This valve is a physical replacement for a counterbalance valve but probably won't work well in a cross-piloted cylinder application. A low pilot ratio is needed for machine stability and a balanced load control has an infinitely high pilot ratio.
  • Applications that use a separate pressure source to the pilot have been successful in providing smooth and stable load control.
  • Sun load control and counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit.
  • This valve has positive seals between all ports.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Partnumber:
MWIM-XMN

Package size:
0 pcs

Min. order quantity is:
1 pcs
Sealkit SUN valve T24A Buna
Partnumber: 990-024-007
Brand Name
Sun Hydraulics

Cavity
T-24A

Contamination level max.
19/17/14 - ISO 4406

Flow rate nominal LMin
480 lpm

Oil viscocity recommended
2,8 - 380 cSt

Pressure max.
350 bar

Pressure setting max.
36.7 bar

Pressure setting min.
36.7 bar

Sealing material
NBR

Temperature max.
+110 °C

Temperature min.
-30 °C

Torque tightening
474 - 508 Nm
Package size
0 pcs

Barcode
5715803521380

Gross weight
Kg

Net weight
Kg

Country of origin
usa

Vented, balanced, load control valve

Vented, balanced load control valves combine a balanced modulating element with a reverse flow check. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while the pilot to open modulating element controls flow from port 1 to port 2. Pilot pressure at port 3 determines the flow setting. Backpressure at port 2 does not affect the flow setting because the spring chamber references the vent (port 4).

  • This valve has no relief function. Not even thermal expansion relief.
  • Maximum valve leakage at reseat for this valve configuration is 5 drops/min. (0,3 cc/min.) at 14 bar below cracking pressure
  • This valve is balanced against load pressures and therefore exhibits self-compensation. Flow is controlled by the pilot pressure. Because of dynamic seals, performance is best in the meter out mode with port 1 being the load and port 2 being tank.
  • All 4-port counterbalance, load control, and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size).
  • This valve is a physical replacement for a counterbalance valve but probably won't work well in a cross-piloted cylinder application. A low pilot ratio is needed for machine stability and a balanced load control has an infinitely high pilot ratio.
  • Applications that use a separate pressure source to the pilot have been successful in providing smooth and stable load control.
  • Sun load control and counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit.
  • This valve has positive seals between all ports.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.