Pump D1P-193-L-A-TPSN-A-E4-Y2-B1-070-280-21-NN-FS-FS-NNN-NNN
The D1 pump series are high performance variable axial piston pumps designed primarily for open circuit
hydraulic systems used in heavy duty mobile applications.
ATEX-certified also available on order.
Displacement options from 130 cm3 to 260 cm3.
Input speed up to 2,500 rpm.
Control options:
- Power control
- Pressure compensated control
- Electric proportional displacement control
- Load sensing control
D1P features and benefits:
- Robust design for harsh conditions.
- Swashplate, servo-controlled design, with proven reliability and performance.
- Angled piston bore design improves self-priming capability.
- The spherical valve plate and cylinder block interface provide stable cylinder block rotation, thus
achieving high efficiency.
- Integral charge pump option allows the pump to run at higher speed and achieve good cold start
performance.
- Full through-drive capability is suitable for adding axial piston pumps and gear pumps.
- Optimized cradle bearing improves pump service life.
PLUS+1® compliant controls.
Can be used together in combination with other Danfoss Power Solutions products in the overall
hydraulic system, such as:
- Pumps (S45, S90, H1P, gear pumps, etc.)
- PVG valves
- Motors (S90, H1B, etc).
D1P typical applications
- Concrete Machinery
- Mining Machinery
- Drilling Machinery
- Material Handling
- Marine and Off-shore Machinery
- Oil Machinery
- Excavators
- Wheel Loaders
- Industrial Hydraulics
Partnumber:
83077482
Package size:
0 pcs
Min. order quantity is:
1 pcs
AuxMount/EndCap code
B1
Brand Name
Danfoss
Contamination level max.
20/18/15 - ISO 4406
Control
Load sensing, Power control, Pressure compensated
Control type
TPSN
Displacement
193 cm3
Displacement limiter
Adjustable
Flange SAE/DIN
6000 PSI
Flange inlet
3.1/2 "
Flange outlet
1 "
Holes circle
224.5 mm
Model
D1P
Model code
D1P-193-L-A-TPSN-A-E4-Y2-B1-070-280-21-NN-FS-FS-NNN-NNN
Mounting flange
SAE-E4
Number of mounting holes
4
Number of outer grooves
15
Oil viscocity recommended
16 - 36 cSt
Port position
Side
Pressure continous max.
400 bar
Pressure max.
350 bar
Rear flange
SAE-B 13T
Recess
165,1 mm
Rotation direction
Left (CCW)
Rotational speed max.
2500 rpm
Rotational speed min.
500 rpm
Sensor type
None
Shaft code
A
Shaft diameter
50,8 mm
Shaft spline
15T 8/16 SAE-D/E
Shaft type
Spline
Standard SAE
SAE J518 Code 62
Temperature max.
+90 °C
Temperature min.
-40 °C
Package size
0 pcs
Barcode
5704334697459
Gross weight
106,00 Kg
Net weight
106,00 Kg
Country of origin
Intrastat code
84135061
The D1 pump series are high performance variable axial piston pumps designed primarily for open circuit
hydraulic systems used in heavy duty mobile applications.
ATEX-certified also available on order.
Displacement options from 130 cm3 to 260 cm3.
Input speed up to 2,500 rpm.
Control options:
- Power control
- Pressure compensated control
- Electric proportional displacement control
- Load sensing control
D1P features and benefits:
- Robust design for harsh conditions.
- Swashplate, servo-controlled design, with proven reliability and performance.
- Angled piston bore design improves self-priming capability.
- The spherical valve plate and cylinder block interface provide stable cylinder block rotation, thus
achieving high efficiency.
- Integral charge pump option allows the pump to run at higher speed and achieve good cold start
performance.
- Full through-drive capability is suitable for adding axial piston pumps and gear pumps.
- Optimized cradle bearing improves pump service life.
PLUS+1® compliant controls.
Can be used together in combination with other Danfoss Power Solutions products in the overall
hydraulic system, such as:
- Pumps (S45, S90, H1P, gear pumps, etc.)
- PVG valves
- Motors (S90, H1B, etc).
D1P typical applications
- Concrete Machinery
- Mining Machinery
- Drilling Machinery
- Material Handling
- Marine and Off-shore Machinery
- Oil Machinery
- Excavators
- Wheel Loaders
- Industrial Hydraulics
Copyright © 2025 HydraSpecma