MVP30.34D-04S5-LMD/MB-N-DEC-1-D-LS2-E axial piston pump
The MVP30.34 is a variable displacement axial piston pump with a swash plate design, perfect for medium and high-pressure open circuit applications. Its compact design allows for direct mounting on motors.
This pump is equipped with DEC “Displacement Electronic Control” which regulates the pump displacement automatically to maintain it below the variable limit set through a command current signal.
- The displacement of the pump is continuously regulated according to the PWM current signal.
- This allows open loop control on pump displacement (direct regulation of pump flow) or to limit the maximum displacement (and flow) to variable values.
- The DEC uses a Normally closed 12 V DC valve, with a Deutsch DT04-2P connector.
Typical Applications:
- Skid Steer Loaders
- Wheel Loaders & Backhoe Loaders
- Mini and Midi-Excavators
- Telehandlers
- Forklifts
- Windmills
- Tractors & Attachments
Varenummer:
650900V7
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Aksel diameter
22 mm
Aksel spline
13T 16/32 SAE-B
Akseltype
Spline
Antal montage huller
2
Flange SAE/DIN
3000 PSI
Flange indgang
1.1/4 "
Flange udgang
3/4 "
Fortrængning
34.8 cm3
Forureningsgrad maks.
18/16/13 - ISO 4406
Kontrol
Load sensing
Kontrol type
LS
Model kode
MVP30.34D-04S5-LMD/MB-N-DEC-1-D-LS2-E
Monteringsflange
SAE-B2
Olieviskositet anbefalet
10 - 1500 cSt
Pakningsmateriale
NBR
Portplacering
Side
Reces
101,6 mm
Rotationshastighed maks.
2900 rpm
Rotationssretning
Right (CW)
Temperatur maks.
+100 °C
Temperatur min.
-25 °C
Tryk intermitterende maks.
280 bar
Tryk kontinuerligt maks.
250 bar
Tryk spids maks.
315 bar
Udvendigt splineantal
13
Pakke str.
0 pcs
Stregkode
5704334933519
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
ita
Intrastat varekode
84135061
The MVP30.34 is a variable displacement axial piston pump with a swash plate design, perfect for medium and high-pressure open circuit applications. Its compact design allows for direct mounting on motors.
This pump is equipped with DEC “Displacement Electronic Control” which regulates the pump displacement automatically to maintain it below the variable limit set through a command current signal.
- The displacement of the pump is continuously regulated according to the PWM current signal.
- This allows open loop control on pump displacement (direct regulation of pump flow) or to limit the maximum displacement (and flow) to variable values.
- The DEC uses a Normally closed 12 V DC valve, with a Deutsch DT04-2P connector.
Typical Applications:
- Skid Steer Loaders
- Wheel Loaders & Backhoe Loaders
- Mini and Midi-Excavators
- Telehandlers
- Forklifts
- Windmills
- Tractors & Attachments
Copyright © 2025 HydraSpecma