XLS 305 Ø25.5mm 6B Spline SAE-A HPS

Danfoss XLS Series – High-Performance Orbital Motors

The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.

All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.

Key Advantages
  • High efficiency and torque stability at low speeds
  • Compact, robust construction for medium-duty use
  • Constant torque in both rotational directions
  • Integrated check valves (case drain optional, not required)
  • Factory-fitted high-pressure shaft seal on all models
  • Wide displacement range: 50 – 395 cm³/rev
  • Continuous pressure: up to 175 bar
  • Intermittent pressure: up to 207 bar
  • Intermittent torque: up to 503 Nm
  • Speed capability: up to 1193 rpm (depending on model)
Typical Applications
  • Aerial work platforms and lifts
  • Screw conveyors, augers, and feeders
  • Agricultural and forestry machinery
  • Process, packaging, and material-handling systems
  • Turf-care and landscape equipment
  • Winches, drives, and lifting mechanisms
Technical Highlights
  • Inlet pressure: up to 225 bar
  • Recommended oil viscosity: 20 – 32 cSt
  • Operating temperature: –34 °C to +82 °C
  • Port threads: G ½ (pressure) / G ¼ (optional drain)
  • Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
  • Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
  • Shaft seal: High-pressure type (standard on all models)
  • Check valve: Integrated, directs oil to outlet port
Note

The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.

Varenummer:
036-0504-003

Pakke str.:
0 pcs

Min. bestillingsenhed er:
1 pcs
Bremse RF2/32/DG-RF/288 Input OMR/OMP Output OMR/OMP ø25
Varenummer: 154-2846
Valve for OMP/OMR with handlever
Varenummer: HSV061-OMP
Aksel diameter
25,4 mm

Aksel spline
SAE 6B 1"

Akseltype
Spline

Akseltætningstype
High pressure packing

Antal montage huller
2

Arbejdsporte
G 1/2 BSP

Boltcirkel
106.4 mm

Dimension H
196 mm

Drænport
G 1/4 BSP

Filtreringskrav
ISO cleanliness code 4406:20/18/13

Flangens Styrediameter
82.5 mm

Fortrængning
305 cm3

Forureningsgrad maks.
20/18/13 - ISO 4406

Indgangstryk Maks.
225 bar

Integreret Kontraventil
Yes

Intermittent Effekt Maks.
23.4

Intermittent Flow Maks.
90

Intermittent Moment Maks.
574 Nm

Intermittent Rotationshastighed Maks.
280

Kontinuerlig effekt maks.
17.7 kW

Kontinuerligt Flow Maks.
70

Krav til drænledning
Optional (Not required due to integrated check valves)

Længde
196 mm

Maks. driftstemperatur
82 °C

Maks. moment på aksel
340 Nm

Maling
Black

Model kode
MCS305AA07AA111020A000C00C

Moment kontinuerlig maks.
485 Nm

Monteringsflange
SAE-A2

Mærke navn
Danfoss

Olieviskositet anbefalet
20 - 32 cSt

Portkode
AA

Portplacering
Side

Reces
82,55 mm

Rotationshastighed kontinuerligt maks.
230 rpm

Temperatur maks.
+82 °C

Temperatur min.
-34 °C

Tryk intermitterende maks.
175 bar

Tryk kontinuerligt maks.
120 bar

Udvendigt splineantal
6
Pakke str.
0 pcs

Stregkode

Brutto vægt
Kg

Netto vægt
Kg

Oprindelsesland
chn

Intrastat varekode
84122981

Danfoss XLS Series – High-Performance Orbital Motors

The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.

All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.

Key Advantages
  • High efficiency and torque stability at low speeds
  • Compact, robust construction for medium-duty use
  • Constant torque in both rotational directions
  • Integrated check valves (case drain optional, not required)
  • Factory-fitted high-pressure shaft seal on all models
  • Wide displacement range: 50 – 395 cm³/rev
  • Continuous pressure: up to 175 bar
  • Intermittent pressure: up to 207 bar
  • Intermittent torque: up to 503 Nm
  • Speed capability: up to 1193 rpm (depending on model)
Typical Applications
  • Aerial work platforms and lifts
  • Screw conveyors, augers, and feeders
  • Agricultural and forestry machinery
  • Process, packaging, and material-handling systems
  • Turf-care and landscape equipment
  • Winches, drives, and lifting mechanisms
Technical Highlights
  • Inlet pressure: up to 225 bar
  • Recommended oil viscosity: 20 – 32 cSt
  • Operating temperature: –34 °C to +82 °C
  • Port threads: G ½ (pressure) / G ¼ (optional drain)
  • Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
  • Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
  • Shaft seal: High-pressure type (standard on all models)
  • Check valve: Integrated, directs oil to outlet port
Note

The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.

Bemærk: Åbning af 3D-filer kræver et program der understøtter fil-formatet

HydraSpecma | Nordens bredeste hydraulik sortiment online - dag til dag levering!
Hydrauliske Systemer – Slange- og Rørledningsartikler til væsketransport – Elektrificering – Vedvarende Energi | HydraSpecma

HYDRASPECMA
– DIN PARTNER FRA IDÉ
TIL SERIEPRODUKTION

Hos HydraSpecma er vi specialiserede i at designe og konstruere state-of-the-art hydrauliske og elektriske systemer, der er skræddersyet til at imødekomme vores kunders dynamiske behov.

Vores ekspertise stopper ikke bare der; vi er også førende inden for levering af omfattende løsninger til væsketransport. Fra slanger og rør af høj kvalitet til robuste fittings og adaptere har vi alt, hvad du behøver for at sikre problemfri væskekontrol.

HydraSpecmas ekspertområde omfatter også en stærk produktportefølje til industrien for vedvarende energi, hvor vi kan støtte din virksomhed med markedsførende køleløsninger, smøre- og filtreringssystemer, hydrauliske systemer og slanger, rør og fittings.

Vores passion for innovation matches af vores ansvar for kvalitet. Hvert produkt og system i vores omfattende sortiment er et vidnesbyrd om vores dedikation til kvalitet. Uanset om du har at gøre med komplekse hydrauliske systemer eller leder efter pålidelige komponenter, der kan vi levere den løsning, du søger.

Tag næste skridt med os, og oplev hvor teknik møder præcision, og hvor hver eneste forbindelse, vi skaber, ikke kun handler om komponenter og systemer, men også om mennesker og deres forretninger.

FOR HOS HYDRASPECMA

ER DIN SUCCES VORES SUCCES