XLS 195 Ø25.5mm 6B Spline SAE-A HPS
Danfoss XLS Series – High-Performance Orbital Motors
The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.
All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.
Key Advantages
- High efficiency and torque stability at low speeds
- Compact, robust construction for medium-duty use
- Constant torque in both rotational directions
- Integrated check valves (case drain optional, not required)
- Factory-fitted high-pressure shaft seal on all models
- Wide displacement range: 50 – 395 cm³/rev
- Continuous pressure: up to 175 bar
- Intermittent pressure: up to 207 bar
- Intermittent torque: up to 503 Nm
- Speed capability: up to 1193 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Screw conveyors, augers, and feeders
- Agricultural and forestry machinery
- Process, packaging, and material-handling systems
- Turf-care and landscape equipment
- Winches, drives, and lifting mechanisms
Technical Highlights
- Inlet pressure: up to 225 bar
- Recommended oil viscosity: 20 – 32 cSt
- Operating temperature: –34 °C to +82 °C
- Port threads: G ½ (pressure) / G ¼ (optional drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard on all models)
- Check valve: Integrated, directs oil to outlet port
Note
The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.
Varenummer:
036-0502-003
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Aksel diameter
25,4 mm
Aksel spline
SAE 6B 1"
Aksel type
Spline
Akselens dreiemoment
340 Nm
Antall monteringshull
2
Arbeidsporter
G 1/2 BSP
Boltsirkel
106.4 mm
Diameter på flensestil
82.5 mm
Drenport
G 1/4 BSP
Filtreringskrav
ISO cleanliness code 4406:20/18/13
Fortrengning
195 cm3
Forureningsgrad maks.
20/18/13 - ISO 4406
H
176 mm
Innløpstrykk Maks.
225
Integrert tilbakeslagsventil
Yes
Intermitterende Rotasjonshastighet Maks.
385
Intermitterende dreiemoment Maks.
465 Nm
Intermitterende effekt Maks.
18.7
Intermitterende flyt Maks.
75
Kode for porttegning
AA
Konstant effekt maks.
12.7 kW
Konstant rotasjon maks.
313 rpm
Kontinuerlig strømning Maks.
61
Krav til avløpsledning
Optional (Not required due to integrated check valves)
Lengde
176 mm
Maks. driftstemperatur
82 °C
Maling
Black
Merke navn
Danfoss
Modell kode
MCS195AA07AA111020A000C00C
Moment kontinuerlig maks.
387 Nm
Monteringsflens
SAE-A2
Oljeviskositet anbefales
20 - 32 cSt
Portplassering
Side
Reces
82,55 mm
Temperatur maks.
+82 °C
Temperatur min.
-34 °C
Trykk intermitterende maks.
175 bar
Trykk kontinuerlig maks.
144 bar
Type akseltetning
High pressure packing
Type portgjenger
BSPP
Utvendig splineantall
6
Pakke str.
0 pcs
Stregkode
Brutto vægt
Kg
Netto vægt
Kg
Oprindelsesland
chn
Intrastat varekode
84122981
Danfoss XLS Series – High-Performance Orbital Motors
The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.
All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.
Key Advantages
- High efficiency and torque stability at low speeds
- Compact, robust construction for medium-duty use
- Constant torque in both rotational directions
- Integrated check valves (case drain optional, not required)
- Factory-fitted high-pressure shaft seal on all models
- Wide displacement range: 50 – 395 cm³/rev
- Continuous pressure: up to 175 bar
- Intermittent pressure: up to 207 bar
- Intermittent torque: up to 503 Nm
- Speed capability: up to 1193 rpm (depending on model)
Typical Applications
- Aerial work platforms and lifts
- Screw conveyors, augers, and feeders
- Agricultural and forestry machinery
- Process, packaging, and material-handling systems
- Turf-care and landscape equipment
- Winches, drives, and lifting mechanisms
Technical Highlights
- Inlet pressure: up to 225 bar
- Recommended oil viscosity: 20 – 32 cSt
- Operating temperature: –34 °C to +82 °C
- Port threads: G ½ (pressure) / G ¼ (optional drain)
- Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
- Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
- Shaft seal: High-pressure type (standard on all models)
- Check valve: Integrated, directs oil to outlet port
Note
The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.
Bemærk: Åbning af 3D-filer kræver et program der understøtter fil-formatet
Copyright © 2026 HydraSpecma