Silflex silicone cooler hose. 6 layer reinforcement Dim. 42
Areas of use: cooling water.
Characteristics: Silicone colling hose, primarily used on cooling systems in morts in cars, busses and trucks.
Construction: Mandrel-built blue hose with reinforcements of synthetic yarns. 6 layers.
Material: Inside and outside blue synthetic silicone rubber (Q), very heat- and Ozone-resistant. Also resistant to cooling detergents as glycol and other alcohols. Outside resistant to light exposure to lubricating oils.
Hose clamps with holes are not to be used on silicone hoses.
Working pressure ar e rated at +20°C and are reduced at rising temperatures, see table below. The working pressure are to be multiplied with the factor at the specific working temperature:
Temp. °C / Factor:
-50°C to +75°C / 1
+100°C / 0,8
+150°C / 0,75
+200°C / 0,65
Partnumber:
0114125042
Package size:
0 Lgt
Min. order quantity is:
1 Lgt
Diameter inner
42 mm
Pressure burst min.
24.8 bar
Package size
0 Lgt
Barcode
5704295872513
Gross weight
1,10 Kg
Net weight
1,10 Kg
Country of origin
Intrastat code
39173900
Areas of use: cooling water.
Characteristics: Silicone colling hose, primarily used on cooling systems in morts in cars, busses and trucks.
Construction: Mandrel-built blue hose with reinforcements of synthetic yarns. 6 layers.
Material: Inside and outside blue synthetic silicone rubber (Q), very heat- and Ozone-resistant. Also resistant to cooling detergents as glycol and other alcohols. Outside resistant to light exposure to lubricating oils.
Hose clamps with holes are not to be used on silicone hoses.
Working pressure ar e rated at +20°C and are reduced at rising temperatures, see table below. The working pressure are to be multiplied with the factor at the specific working temperature:
Temp. °C / Factor:
-50°C to +75°C / 1
+100°C / 0,8
+150°C / 0,75
+200°C / 0,65
Copyright © 2025 HydraSpecma