Solenoid Valve 2/2 12l/m NO SV08-22-03-00-00-B-00
Solenoid Valve, Spool Type, 2-Position, 2-Way, Normally Open, Pull-Type. When de-energized, the SV08-22-03 allows flow in both directions. When energized, flow is blocked in both directions. Follow the “Operating Envelope” limits to ensure shifting of the valve during operation.
Applications
These spool-type valves are primarily used in mobile and industrial applications for blocking the flow of a 2-way function, pump unloading or cylinder regeneration. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input.
Spool valves will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve. This valve can operate with an inlet pressure of 315 bar for 400,000 cycles. In case of inlet from port 2 this value can be increased to 600,000 cycles.
Partnumber:
83025412
Package size:
1 st
Min. order quantity is:
1 st
Aktivering
Solenoid
Antal väger/positioner
2/2
Flödeshastighet nominell LMin
12 lpm
Föroreningsgrad max.
20/18/14 - ISO 4406
Inbyggt filter
No
Kavitet
SDC08-2
Magnetspoltyp
M13 - R13
Manuellt styrd
No
Modell kod
SV08-22-03-00-00-B-00
Märke namn
Danfoss
Oljeviskositet rekommanderad
12 - 54 cSt
Packningsmaterial
NBR
Temperatur max.
+100 °C
Temperatur min.
-40 °C
Tryck max.
230 bar
Ventiltyp
NO - Normally open
Åtdragning moment
35 - 40 Nm
Package size
1 st
Barcode
374779
Gross weight
0,11 Kg
Net weight
0,11 Kg
Country of origin
ITA
Intrastat code
85051990
Solenoid Valve, Spool Type, 2-Position, 2-Way, Normally Open, Pull-Type. When de-energized, the SV08-22-03 allows flow in both directions. When energized, flow is blocked in both directions. Follow the “Operating Envelope” limits to ensure shifting of the valve during operation.
Applications
These spool-type valves are primarily used in mobile and industrial applications for blocking the flow of a 2-way function, pump unloading or cylinder regeneration. Solenoid spool-type valves are direct acting and respond quickly to coil voltage input.
Spool valves will have some leakage due to spool clearance, so if your application requires no leakage at the working port(s), apply a low leakage poppet valve(s), like PO check valve, counterbalance valve, etc., in addition to this solenoid valve. This valve can operate with an inlet pressure of 315 bar for 400,000 cycles. In case of inlet from port 2 this value can be increased to 600,000 cycles.
Copyright © 2025 HydraSpecma