Flexlight V9 red extraction hose - 0110270

Areas of use: Cold and hot air, smoke gases, fumes.

Characteristics: A very light and flexible hose for injection and extraction of cold and hot air, smoke gases and fumes. Type V9 are used in places, where both good resistance to heat and cold are nedded and thus it is often used in the aircraft-industry.

Temperature range: -60°C to +300°C. (At a sorrounding temperature of +20°C).

Construction: Mandrel-built hose with inside visible steel-spiral, vulkanised to a layer of rubber-covered silicone fabric. Outside with white glass-cord. The hose are light corrugated.

Material: Glass-fabric covered with red silicone-rubber. Spiral of steel. Outside thread of white glass-cord. Silicone has low wear-resistance, and thus the hose must be mounted in such a way, that theres is no wear on its outside.

Hose clamps : See section 0116 Hose clamps.

Standard length: 4 mtr. (Only available from stock in full lengths). Other dimensions available on request.

Min. bend radius are measured inside the bend.