5/8" Hydraulic hose SPT-110-N - 1SN WP 130 bar
Hydraulic hose for conveying hydraulic fluids with a working pressure of 130 bar. The hose is built with a synthetic rubber inner tube and cover, and reinforced with 1 layer of high tensile steel wire braid.
Dimensioned with 16 mm inner diameter and 23.1 mm outer diameter, and specified with a minimum bend radius of 100 mm for routing in hydraulic installations where controlled flexibility is required.
Typical Applications
- Hydraulic lines for oil-based media such as oil and diesel
- Lines for water and grease where these media are used in hydraulic or fluid transfer circuits
Partnumber:
SPT110N
Package size:
0 m
Min. order quantity is:
1 m
Area of use
Diesel, Grease, Oil, Water
Bend radius
100 mm
Brand Name
Hydraspecma
Cover
Synthetic rubber
Diameter inner
16 mm
Diameter outer
23.1 mm
Hose size
5/8 "
Hose type
1SN
Pressure burst min.
520 bar
Pressure max.
130 bar
REACH compliant
Yes
Reinforcement
1 layer high tensile steel wire braid
RoHs compliant
Yes
Standard EN
EN 853 1SN
Standard ISO
ISO 1436 1SN
Standard SAE
SAE 100R1AT
Temperature intermittent max.
+120 °C
Temperature max.
+100 °C
Temperature min.
-40 °C
Tube
Synthetic rubber
Package size
0 m
Barcode
5704334781738
Gross weight
0,46 Kg
Net weight
0,46 Kg
Country of origin
ITA
Intrastat code
40092100
Hydraulic hose for conveying hydraulic fluids with a working pressure of 130 bar. The hose is built with a synthetic rubber inner tube and cover, and reinforced with 1 layer of high tensile steel wire braid.
Dimensioned with 16 mm inner diameter and 23.1 mm outer diameter, and specified with a minimum bend radius of 100 mm for routing in hydraulic installations where controlled flexibility is required.
Typical Applications
- Hydraulic lines for oil-based media such as oil and diesel
- Lines for water and grease where these media are used in hydraulic or fluid transfer circuits
Copyright © 2026 HydraSpecma