Adaptor male M16x2 female M12,
Test adaptor for connecting a mini test point connection to a hydraulic system. The adaptor provides an external metric thread M16x2 on one side and an internal thread M12,65x1,5 on the other side, enabling a compact interface for test equipment connection.
Supplied in steel with zinc-nickel plated surface treatment and sealed with FKM/FPM (Viton®). With a maximum working pressure of 630 bar and a temperature range of -20 to +100 °C, it is intended for high-pressure measurement points where the selected thread interface and seal material are critical for correct selection.
Typical Applications
- Connection of test and diagnostic equipment to hydraulic measurement points
- Pressure measurement setups on hydraulic lines where an M16x2 to M12,65x1,5 interface is required
Partnumber:
SAD20/12
Package size:
0 pcs
Min. order quantity is:
1 pcs
Brand Name
Stauff
Material
Steel
Model code
SAD-20/12-W3
Pressure max.
630 bar
Sealing material
FKM/FPM (Viton®)
Surface treatment
Zinc-Nickel plated
T
M12,65x1,5
Temperature max.
+100 °C
Temperature min.
-20 °C
Thread inner metric
M12,65x1,5
Thread outer metric
M16x2
h
39 mm
Package size
0 pcs
Barcode
5704295365381
Gross weight
0,06 Kg
Net weight
0,06 Kg
Country of origin
DEU
Intrastat code
84812010
Test adaptor for connecting a mini test point connection to a hydraulic system. The adaptor provides an external metric thread M16x2 on one side and an internal thread M12,65x1,5 on the other side, enabling a compact interface for test equipment connection.
Supplied in steel with zinc-nickel plated surface treatment and sealed with FKM/FPM (Viton®). With a maximum working pressure of 630 bar and a temperature range of -20 to +100 °C, it is intended for high-pressure measurement points where the selected thread interface and seal material are critical for correct selection.
Typical Applications
- Connection of test and diagnostic equipment to hydraulic measurement points
- Pressure measurement setups on hydraulic lines where an M16x2 to M12,65x1,5 interface is required
Note: Opening 3D files requires a program that supports the file format
Copyright © 2026 HydraSpecma