3/4" Insert - (25S) M36x2 female - 45°
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female end helps route the hose connection where a straight fitting would be difficult due to space or hose routing.
Specified for 3/4" hose and supplied with an M36x2 female thread interface. Selection is primarily based on hose size, required thread, and the 45° bend angle in the connection point.
Typical Applications
- Hydraulic hose assemblies where an angled threaded connection is required
- Hose routing in confined installations requiring a 45° connection orientation
Partnumber:
GS1225RO36B4
Package size:
0 pcs
Min. order quantity is:
1 pcs
A
137,3 mm
B
86,3 mm
D
3/4"
DN
20
Diameter rør
25 mm
E
31,2 mm
Gevind indvendig metrisk
M36x2
H
46 mm
Korrosions resistens
500 hours salt spray ASTM B-117
Materiale
Steel
Model kode
12GS-25FDHORX45
Mærke navn
Gates
Overfladebehandling
TuffCoat™
Pakningsmateriale
NBR
REACH compliant
Yes
RoHs compliant
Yes
Serie
S
Slangekoblingstype
For separate ferrule
Slangestørrelse
3/4 "
Temperatur maks.
+100 °C
Temperatur min.
-35 °C
Tilspændingsmoment
125 - 135 Nm
Vinkel
45 °
Package size
0 pcs
Barcode
5412571559675
Gross weight
0,53 Kg
Net weight
0,53 Kg
Country of origin
CZE
Intrastat code
73269098
Hose insert for hydraulic hose assemblies, designed to be used with a separate ferrule. The 45° angled female end helps route the hose connection where a straight fitting would be difficult due to space or hose routing.
Specified for 3/4" hose and supplied with an M36x2 female thread interface. Selection is primarily based on hose size, required thread, and the 45° bend angle in the connection point.
Typical Applications
- Hydraulic hose assemblies where an angled threaded connection is required
- Hose routing in confined installations requiring a 45° connection orientation
Copyright © 2026 HydraSpecma