Flow control valve, Tognella FT1253/5-01-38

Single-acting needle control valves for an accurate control of the fluid in one direction and free passage in the opposite direction.

Suitable for application with air, gas and liquids in general. Same basic characteristics as the FT 257 series: full shut off via metal seal; simple setting of flow rates; secure against accidental needle withdrawal; secure needle position with locking screw inserted in the handwheel; provisions for panel mounting, for which special lock nut (G) is supplied (on request only).

Materials:
Body: OT 58 - UNI 5705
Nickel plated.
Needle: X 10 Cr Ni S 1809 - UNI 6900.
O-ring: Nitrile.
Antiextrusion ring PTFE.
Handwheel: ma GD - Al Si 12 UNI 5706 aluminium.

Varenummer:
FT1253/5-38

Pakke str.:
0 pcs

Min. bestillingsenhed er:
1 pcs
Dimension A
G 3/8 BSP

Dimension B
13 mm

Dimension C
55 mm

Dimension CH
22 mm

Dimension D
69 mm

Dimension E
7 mm

Dimension F
27 mm

Dimension G
12.5 mm

Dimension H metric
M20x1 mm

Dimension L
15 mm

Flow rate nominal LMin
23 lpm

Pressure compensated
No

Pressure max.
210 bar

Temperature max.
+100 °C

Temperature min.
-20 °C

Thread
G 3/8 BSP
Förpackningsstorlek
0 pcs

Streckkod
5704295025902

Bruttovikt
0,25 Kg

Nettovikt
0,25 Kg

Ursprungsland
ITA

Intrastat artikelkod
84812010

Single-acting needle control valves for an accurate control of the fluid in one direction and free passage in the opposite direction.

Suitable for application with air, gas and liquids in general. Same basic characteristics as the FT 257 series: full shut off via metal seal; simple setting of flow rates; secure against accidental needle withdrawal; secure needle position with locking screw inserted in the handwheel; provisions for panel mounting, for which special lock nut (G) is supplied (on request only).

Materials:
Body: OT 58 - UNI 5705
Nickel plated.
Needle: X 10 Cr Ni S 1809 - UNI 6900.
O-ring: Nitrile.
Antiextrusion ring PTFE.
Handwheel: ma GD - Al Si 12 UNI 5706 aluminium.