Pump D1P-193-L-A-TPSN-A-E4-Y2-B1-070-280-21-NN-FS-FS-NNN-NNN
The D1 pump series are high performance variable axial piston pumps designed primarily for open circuit
hydraulic systems used in heavy duty mobile applications.
ATEX-certified also available on order.
Displacement options from 130 cm3 to 260 cm3.
Input speed up to 2,500 rpm.
Control options:
- Power control
- Pressure compensated control
- Electric proportional displacement control
- Load sensing control
D1P features and benefits:
- Robust design for harsh conditions.
- Swashplate, servo-controlled design, with proven reliability and performance.
- Angled piston bore design improves self-priming capability.
- The spherical valve plate and cylinder block interface provide stable cylinder block rotation, thus
achieving high efficiency.
- Integral charge pump option allows the pump to run at higher speed and achieve good cold start
performance.
- Full through-drive capability is suitable for adding axial piston pumps and gear pumps.
- Optimized cradle bearing improves pump service life.
PLUS+1® compliant controls.
Can be used together in combination with other Danfoss Power Solutions products in the overall
hydraulic system, such as:
- Pumps (S45, S90, H1P, gear pumps, etc.)
- PVG valves
- Motors (S90, H1B, etc).
D1P typical applications
- Concrete Machinery
- Mining Machinery
- Drilling Machinery
- Material Handling
- Marine and Off-shore Machinery
- Oil Machinery
- Excavators
- Wheel Loaders
- Industrial Hydraulics
Varenummer:
83077482
Pakke str.:
0 pcs
Min. bestillingsenhed er:
1 pcs
Aksel diameter
50,8 mm
Aksel kode
A
Aksel spline
15T 8/16 SAE-D/E
Akseltype
Spline
Antal montage huller
4
Bagflange
SAE-B 13T
Boltcirkel
224.5 mm
Ekstra montering/endedæksel type
B1
Flange SAE/DIN
6000 PSI
Flange indgang
3.1/2 "
Flange udgang
1 "
Fortrængning
193 cm3
Fortrængningsbegrænser
Adjustable
Forureningsgrad maks.
20/18/15 - ISO 4406
Kontrol
Load sensing, Power control, Pressure compensated
Kontrol type
TPSN
Model
D1P
Model kode
D1P-193-L-A-TPSN-A-E4-Y2-B1-070-280-21-NN-FS-FS-NNN-NNN
Monteringsflange
SAE-E4
Mærke navn
Danfoss
Olieviskositet anbefalet
16 - 36 cSt
Portplacering
Side
Reces
165,1 mm
Rotationshastighed maks.
2500 rpm
Rotationshastighed min.
500 rpm
Rotationssretning
Left (CCW)
Sensor type
None
Standard SAE
SAE J518 Code 62
Temperatur maks.
+90 °C
Temperatur min.
-40 °C
Tryk kontinuerligt maks.
400 bar
Tryk maks.
350 bar
Udvendigt splineantal
15
Pakke str.
0 pcs
Stregkode
5704334697459
Brutto vægt
106,00 Kg
Netto vægt
106,00 Kg
Oprindelsesland
Intrastat varekode
84135061
The D1 pump series are high performance variable axial piston pumps designed primarily for open circuit
hydraulic systems used in heavy duty mobile applications.
ATEX-certified also available on order.
Displacement options from 130 cm3 to 260 cm3.
Input speed up to 2,500 rpm.
Control options:
- Power control
- Pressure compensated control
- Electric proportional displacement control
- Load sensing control
D1P features and benefits:
- Robust design for harsh conditions.
- Swashplate, servo-controlled design, with proven reliability and performance.
- Angled piston bore design improves self-priming capability.
- The spherical valve plate and cylinder block interface provide stable cylinder block rotation, thus
achieving high efficiency.
- Integral charge pump option allows the pump to run at higher speed and achieve good cold start
performance.
- Full through-drive capability is suitable for adding axial piston pumps and gear pumps.
- Optimized cradle bearing improves pump service life.
PLUS+1® compliant controls.
Can be used together in combination with other Danfoss Power Solutions products in the overall
hydraulic system, such as:
- Pumps (S45, S90, H1P, gear pumps, etc.)
- PVG valves
- Motors (S90, H1B, etc).
D1P typical applications
- Concrete Machinery
- Mining Machinery
- Drilling Machinery
- Material Handling
- Marine and Off-shore Machinery
- Oil Machinery
- Excavators
- Wheel Loaders
- Industrial Hydraulics
Copyright © 2026 HydraSpecma