Press.comp Flow Cont. valve 100l/m (16-40l/m) VRC 12-E-4.00-

This is a partially adjustable, priority type, pressure compensated flow control valve, where the flow from port 3 will remain constant regardless of the pressure difference across the valve, while excess flow passes from port 1 to 2.

Flow enters at port 1 and passes across a fixed orifice in the spool, which creates a pressure drop. This causes the spool to move back against the spring, which then restricts the outlet flow. Port 1 then opens to port 2 to allow excess flow to pass. The regulated flow will always take priority and remains constant if the working pressure is higher in either port 2 or port 3.

Artikelnummer:
820172119

Förpackningsstorlek:
0 pcs

Minsta beställningskvantitet:
1 pcs
Ventilhus NCS12/3-SES 3/4 Stål
Artikelnummer: 11029075
Ventilhus Comatrol NCS 12/3 SE 1/2
Artikelnummer: 922501712
Ventilhus Comatrol NCS 12/3 SE 3/4
Artikelnummer: 922501812
Ventilhus Comatrol NCS12/3--SI 1/2
Artikelnummer: 922501912
Ventilhus Comatrol NCS12/3-SI 3/4
Artikelnummer: 922502012
Ventilhus Comatrol NCS12/3-DL 3/4
Artikelnummer: 922502122
Ventilhus Comatrol NCS12/3--DL 1/2
Artikelnummer: 922502222
P-sats NCS 12 3 VIE
Artikelnummer: 230000130
Flowmin. reglerat
16 lpm

Flöde in max.
100 lpm

Flöde max. reglerat
40 l/min

Flödeshastighet nominell LMin
73 lpm

Föroreningsgrad max.
20/18/14 - ISO 4406

Kavitet
NCS12/3

Modell kod
VRC12-E-4.00-00

Märke namn
Danfoss

Oljeviskositet rekommanderad
12 - 54 cSt

Temperatur max.
+100 °C

Temperatur min.
-40 °C

Tryck max.
315 bar

Tryckkompenserad
Yes

Åtdragning moment
65 - 70 Nm
Förpackningsstorlek
0 pcs

Streckkod
5704334468066

Bruttovikt
0,46 Kg

Nettovikt
0,46 Kg

Ursprungsland
ITA

Intrastat artikelkod
84812010

This is a partially adjustable, priority type, pressure compensated flow control valve, where the flow from port 3 will remain constant regardless of the pressure difference across the valve, while excess flow passes from port 1 to 2.

Flow enters at port 1 and passes across a fixed orifice in the spool, which creates a pressure drop. This causes the spool to move back against the spring, which then restricts the outlet flow. Port 1 then opens to port 2 to allow excess flow to pass. The regulated flow will always take priority and remains constant if the working pressure is higher in either port 2 or port 3.