MVP30.34D-04S5-LMD/MB-N-DEC-1-D-LS2-E axial piston pump
The MVP30.34 is a variable displacement axial piston pump with a swash plate design, perfect for medium and high-pressure open circuit applications. Its compact design allows for direct mounting on motors.
This pump is equipped with DEC “Displacement Electronic Control” which regulates the pump displacement automatically to maintain it below the variable limit set through a command current signal.
- The displacement of the pump is continuously regulated according to the PWM current signal.
- This allows open loop control on pump displacement (direct regulation of pump flow) or to limit the maximum displacement (and flow) to variable values.
- The DEC uses a Normally closed 12 V DC valve, with a Deutsch DT04-2P connector.
Typical Applications:
- Skid Steer Loaders
- Wheel Loaders & Backhoe Loaders
- Mini and Midi-Excavators
- Telehandlers
- Forklifts
- Windmills
- Tractors & Attachments
Artikelnummer:
650900V7
Förpackningsstorlek:
0 pcs
Minsta beställningskvantitet:
1 pcs
Contamination level max.
18/16/13 - ISO 4406
Control
Load sensing
Control type
LS
Displacement
34.8 cm3
Flange SAE/DIN
3000 PSI
Flange inlet
1.1/4 "
Flange outlet
3/4 "
Model code
MVP30.34D-04S5-LMD/MB-N-DEC-1-D-LS2-E
Mounting flange
SAE-B2
Number of mounting holes
2
Number of outer grooves
13
Oil viscocity recommended
10 - 1500 cSt
Port position
Side
Pressure continous max.
250 bar
Pressure intermittent max.
280 bar
Pressure peak max.
315 bar
Recess
101,6 mm
Rotation direction
Right (CW)
Rotational speed max.
2900 rpm
Sealing material
NBR
Shaft diameter
22 mm
Shaft spline
13T 16/32 SAE-B
Shaft type
Spline
Temperature max.
+100 °C
Temperature min.
-25 °C
Förpackningsstorlek
0 pcs
Streckkod
5704334933519
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
ita
Intrastat artikelkod
84135061
The MVP30.34 is a variable displacement axial piston pump with a swash plate design, perfect for medium and high-pressure open circuit applications. Its compact design allows for direct mounting on motors.
This pump is equipped with DEC “Displacement Electronic Control” which regulates the pump displacement automatically to maintain it below the variable limit set through a command current signal.
- The displacement of the pump is continuously regulated according to the PWM current signal.
- This allows open loop control on pump displacement (direct regulation of pump flow) or to limit the maximum displacement (and flow) to variable values.
- The DEC uses a Normally closed 12 V DC valve, with a Deutsch DT04-2P connector.
Typical Applications:
- Skid Steer Loaders
- Wheel Loaders & Backhoe Loaders
- Mini and Midi-Excavators
- Telehandlers
- Forklifts
- Windmills
- Tractors & Attachments
Copyright © 2026 HydraSpecma