Valve controller - 24Vdc programmable for double coil valve
Control and regulation of double coil hydraulic proportional valves used for accurate oil flow regulation, linear soft acceleration and deceleration, modulated output signal, and programmable dead band.
Is suitable for joystick.
Suitable where changes to A and B need to be selected directly or according to the value of an input signal.
During operation the display shows the present output signal as a % of the I valve.
Programmable current or voltage input for standard signals.
Digital inputs for external control functions.
A pulsating current output prevents the connected valve from sticking.
Optional programming of the modulation frequency (PWM) between 8 and 400 Hz.
Multiple adjustable parameters such as output currents, ramp times, jump values, Dither frequency, reversal, dead band, and ON/OFF ramp functions.
Mounting for a standard 11-pole socket.
NB: If this module will be used as replacement for an Atos module, then be aware that connection and adjustment are different from Atos modules. It’s therefore not possible to mount them as replacement for an old Atos module in a electrical control without change in wire connection!
Varenummer:
22242B
Pakke str.:
1 pcs
Min. bestillingsenhed er:
1 pcs
Current type
DC
Height
80.5 mm
Length
84.5 mm
Number of outputs
2
Power W
2 W
Ramp function
Yes
Temperature max.
+60 °C
Temperature min.
-20 °C
Voltage
24 V
Width
35.5 mm
Package size
1 pcs
Barcode
5704334784586
Gross weight
Kg
Net weight
Kg
Country of origin
DNK
Intrastat code
84812010
Control and regulation of double coil hydraulic proportional valves used for accurate oil flow regulation, linear soft acceleration and deceleration, modulated output signal, and programmable dead band.
Is suitable for joystick.
Suitable where changes to A and B need to be selected directly or according to the value of an input signal.
During operation the display shows the present output signal as a % of the I valve.
Programmable current or voltage input for standard signals.
Digital inputs for external control functions.
A pulsating current output prevents the connected valve from sticking.
Optional programming of the modulation frequency (PWM) between 8 and 400 Hz.
Multiple adjustable parameters such as output currents, ramp times, jump values, Dither frequency, reversal, dead band, and ON/OFF ramp functions.
Mounting for a standard 11-pole socket.
NB: If this module will be used as replacement for an Atos module, then be aware that connection and adjustment are different from Atos modules. It’s therefore not possible to mount them as replacement for an old Atos module in a electrical control without change in wire connection!
Copyright © 2025 HydraSpecma