Red Exhaust hose type Flexlight M9. Dim. 44mm

Areas of application: Cold and hot air, flue gases, vapours.

Properties: A very light and flexible hose for blowing in and extracting cold and hot air, flue gases and vapours. Type M9 is used in places where both high heat and cold resistance are required. Compared to type V9, the hose is more pressure resistant.

Construction: Mandrel-built hose with a double layer of silicone rubber coated tissue and steel spiral between the two layers. Exterior with 2 white glass curtains. Smooth on the inside and slightly corrugated on the outside.

Material: Glass fabric coated with red silicone rubber. Steel spiral. The outer threads are of white glass cord. Silicone has little abrasion resistance, and therefore the hose must be installed in such a way that it does not wear out on the outside.

Partnumber:
0110272044

Package size:
4 m

Min. order quantity is:
8 m
Bøjningsradius
44 mm

Diameter indvendig
44 mm

Længde
4 m

Temperatur maks.
+310 °C

Temperatur min.
-85 °C

Tryk maks.
2.5 bar

Vakuum maks.
0.565 bar
Pakke str.
4 m

Stregkode
5704295672489

Brutto vægt
1,14 Kg

Netto vægt
1,14 Kg

Oprindelsesland

Intrastat varekode
39172290

Areas of application: Cold and hot air, flue gases, vapours.

Properties: A very light and flexible hose for blowing in and extracting cold and hot air, flue gases and vapours. Type M9 is used in places where both high heat and cold resistance are required. Compared to type V9, the hose is more pressure resistant.

Construction: Mandrel-built hose with a double layer of silicone rubber coated tissue and steel spiral between the two layers. Exterior with 2 white glass curtains. Smooth on the inside and slightly corrugated on the outside.

Material: Glass fabric coated with red silicone rubber. Steel spiral. The outer threads are of white glass cord. Silicone has little abrasion resistance, and therefore the hose must be installed in such a way that it does not wear out on the outside.