3/4" Shuttle valve
Shuttle valve for hydraulic circuits where one outlet needs to be supplied from whichever of two inlet pressure lines is higher. This makes it suitable for selecting between two independent pressure signals while isolating the lower-pressure side.
The valve has G 3/4 BSP ports and NBR sealing material. Zinc-plated surface treatment is specified for the exterior. Rated for flows up to 110 l/min and a maximum working pressure of 350 bar, with an operating temperature range from -30 °C to +100 °C.
Typical Applications
- Selecting between two pressure sources or pressure signals in a hydraulic circuit
- Supplying a common outlet line from two alternative inlet lines while preventing crossflow
Partnumber:
VU2P-34
Package size:
1 pcs
Min. order quantity is:
1 pcs
Brand Name
OM Oleodinamica Marchesini
Flow max.
110 lpm
Flow rate nominal LMin
110 lpm
H
58 mm
L
80 mm
L1
127 mm
L2
12 mm
L3
44 mm
Material
Steel
Oil Temperature Recommended
50 °C
Oil viscocity recommended
30 cSt
P
3/4 BSP
Pressure max.
350 bar
S
35 mm
Sealing material
NBR
Surface treatment
Zinc-plated
Temperature max.
+100 °C
Temperature min.
-30 °C
Thread
G 3/4 BSP
U
3/4 BSP
ØD
8,5 mm
Förpackningsstorlek
1 pcs
Streckkod
197965
Bruttovikt
Kg
Nettovikt
Kg
Ursprungsland
ITA
Intrastat artikelkod
84812010
Shuttle valve for hydraulic circuits where one outlet needs to be supplied from whichever of two inlet pressure lines is higher. This makes it suitable for selecting between two independent pressure signals while isolating the lower-pressure side.
The valve has G 3/4 BSP ports and NBR sealing material. Zinc-plated surface treatment is specified for the exterior. Rated for flows up to 110 l/min and a maximum working pressure of 350 bar, with an operating temperature range from -30 °C to +100 °C.
Typical Applications
- Selecting between two pressure sources or pressure signals in a hydraulic circuit
- Supplying a common outlet line from two alternative inlet lines while preventing crossflow
Copyright © 2026 HydraSpecma