Rev. counter PPC04/12 With 3 mtr cable

The Sensor-PPC-04/12-SDS-CAB rotational speed sensor allow non-contact speed measurement of rotating components. The sensor is based on an opto-electrical measurement principle that determines the rotational speed with high accuracy using a reflecting strip on the shaft.

The contact rotational speed measurement is achieved by using a contact adaptor attached to the sensor, which touches the rotating component during the measurement process. This method ensures highly accurate results. For particularly small areas, a focusing adaptor can be used to facilitate the measurement.

 

Note:

  • The analogue rotational speed sensor can only be used with analogue dataloggers

 

  • It’s not recommended to extend the sensor beyond the 2-meter permanent cable connection provided with the sensor.

 

 

Partnumber:
PPC-04/12-SDS-CAB

Package size:
1 st

Min. order quantity is:
1 st
Brand Name
Stauff

Cable length
3 m

Output signal max.
3 V

Output signal min.
0 V

Rotational speed max.
10000 rpm

Rotational speed min.
20 rpm

Sensor type
SR

Temperature ambient max.
+85 °C

Temperature ambient min.
-25 °C
Package size
1 st

Barcode
240268

Gross weight
0,22 Kg

Net weight
0,22 Kg

Country of origin
DEU

Intrastat code
90261021

The Sensor-PPC-04/12-SDS-CAB rotational speed sensor allow non-contact speed measurement of rotating components. The sensor is based on an opto-electrical measurement principle that determines the rotational speed with high accuracy using a reflecting strip on the shaft.

The contact rotational speed measurement is achieved by using a contact adaptor attached to the sensor, which touches the rotating component during the measurement process. This method ensures highly accurate results. For particularly small areas, a focusing adaptor can be used to facilitate the measurement.

 

Note:

  • The analogue rotational speed sensor can only be used with analogue dataloggers

 

  • It’s not recommended to extend the sensor beyond the 2-meter permanent cable connection provided with the sensor.