XLS 395 Ø25.5mm 6B Spline SAE-A HPS

Danfoss XLS Series – High-Performance Orbital Motors

The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.

All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.

Key Advantages
  • High efficiency and torque stability at low speeds
  • Compact, robust construction for medium-duty use
  • Constant torque in both rotational directions
  • Integrated check valves (case drain optional, not required)
  • Factory-fitted high-pressure shaft seal on all models
  • Wide displacement range: 50 – 395 cm³/rev
  • Continuous pressure: up to 175 bar
  • Intermittent pressure: up to 207 bar
  • Intermittent torque: up to 503 Nm
  • Speed capability: up to 1193 rpm (depending on model)
Typical Applications
  • Aerial work platforms and lifts
  • Screw conveyors, augers, and feeders
  • Agricultural and forestry machinery
  • Process, packaging, and material-handling systems
  • Turf-care and landscape equipment
  • Winches, drives, and lifting mechanisms
Technical Highlights
  • Inlet pressure: up to 225 bar
  • Recommended oil viscosity: 20 – 32 cSt
  • Operating temperature: –34 °C to +82 °C
  • Port threads: G ½ (pressure) / G ¼ (optional drain)
  • Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
  • Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
  • Shaft seal: High-pressure type (standard on all models)
  • Check valve: Integrated, directs oil to outlet port
Note

The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.

Partnumber:
036-0505-003

Package size:
1 st

Min. order quantity is:
1 st
Antal monteringshål
2

Arbetsportar
G 1/2 BSP

Axel diameter
25,4 mm

Axel spline
SAE 6B 1"

Axeltyp
Spline

Bultcirkel
106.4 mm

Deplacement
395 cm3

Dimension H
196 mm

Dräneringsport
G 1/4 BSP

Filtreringskrav
ISO cleanliness code 4406:20/18/13

Flänsens styrdiameter
82.5 mm

Färg
Black

Föroreningsgrad max.
20/18/13 - ISO 4406

Ingångstryck Max.
225

Integrerad backventil
Yes

Intermittent Rotationshastighet Max.
190

Intermittent effekt Max.
9.6

Intermittent flöde Max.
75

Intermittent vridmoment Max.
410 Nm

Kont. rotation max.
155 rpm

Kontinuerlig effekt max.
6.7 kW

Kontinuerligt flöde Max.
61

Krav på dräneringsledning
Optional (Not required due to integrated check valves)

Längd
196 mm

Max. driftstemperatur
82 °C

Max. vridmoment på axel
340 Nm

Modell kod
MCS395AA07AA111020A000C00C

Moment kontinuerlig max.
483 Nm

Monteringsfläns
SAE-A2

Märke namn
Danfoss

Oljeviskositet rekommanderad
20 - 32 cSt

Portkod
AA

Portplacering
Side

Reces
82,55 mm

Temperatur max.
+82 °C

Temperatur min.
-34 °C

Tryck intermittent max.
90 bar

Tryck kontinuerlig max.
78 bar

Typ av axeltätning
High pressure packing

Utv. Splinesantal
6
Package size
1 st

Barcode
485117

Gross weight
Kg

Net weight
Kg

Country of origin
chn

Intrastat code
84122981

Danfoss XLS Series – High-Performance Orbital Motors

The Danfoss XLS series is designed for demanding mobile and industrial applications that require high torque at low speed.
Built on proven Geroler™ orbital technology with a spool-valve system and hydrodynamic journal bearings, the XLS motors deliver smooth performance, high efficiency, and long service life in a compact design.

All motors in this range are equipped with a high-pressure shaft seal and integrated check valves, which return case oil to the outlet port.
This design minimizes internal pressure and makes the case drain connection optional — ideal for installations where space and simplicity matter.

Key Advantages
  • High efficiency and torque stability at low speeds
  • Compact, robust construction for medium-duty use
  • Constant torque in both rotational directions
  • Integrated check valves (case drain optional, not required)
  • Factory-fitted high-pressure shaft seal on all models
  • Wide displacement range: 50 – 395 cm³/rev
  • Continuous pressure: up to 175 bar
  • Intermittent pressure: up to 207 bar
  • Intermittent torque: up to 503 Nm
  • Speed capability: up to 1193 rpm (depending on model)
Typical Applications
  • Aerial work platforms and lifts
  • Screw conveyors, augers, and feeders
  • Agricultural and forestry machinery
  • Process, packaging, and material-handling systems
  • Turf-care and landscape equipment
  • Winches, drives, and lifting mechanisms
Technical Highlights
  • Inlet pressure: up to 225 bar
  • Recommended oil viscosity: 20 – 32 cSt
  • Operating temperature: –34 °C to +82 °C
  • Port threads: G ½ (pressure) / G ¼ (optional drain)
  • Mounting flange: SAE A 2-bolt (A2) – Ø 82.5 mm pilot / Ø 106.4 mm bolt circle
  • Shaft options: Ø 25 mm straight (code 10) or SAE 6B 1" spline (code 07)
  • Shaft seal: High-pressure type (standard on all models)
  • Check valve: Integrated, directs oil to outlet port
Note

The case drain port is optional and not required under normal operating conditions.
For high-temperature or high-displacement applications, connecting an external drain line can further reduce case pressure and extend seal life.

Note: Opening 3D files requires a program that supports the file format