XLH 200 Ø25mm SAE-A HPS

The Danfoss XLH series is designed for medium-duty applications requiring reliable low speed and high torque. Built on the proven orbital motor principle with spool valve distribution and hydrodynamic journal bearings, these motors deliver robust performance, long service life, and a compact footprint. With SAE-A2 flange mounting, high-pressure shaft seals, and a choice of cylindrical or splined shafts, XLH motors are well suited for a wide range of mobile and industrial machinery.

Key Advantages

  • Reliable performance at low speeds
  • Compact and robust construction
  • Constant torque in both rotational directions
  • Hydrodynamic journal bearings for long life
  • High-pressure shaft seal as standard
  • Displacement range: 80 to 400 cm³
  • Max. continuous torque up to 426 Nm
  • Max. intermittent torque up to 547 Nm
  • Continuous speed capability up to 462 RPM (depending on model)

Typical Applications

  • Aerial work platforms and lifts
  • Augers, sweepers, and mixers
  • Conveyors and material handling systems
  • Agricultural machinery and implements
  • Turf care and landscaping equipment
  • Winches, auxiliary drives, and feeders

Technical Highlights

  • Inlet pressure up to 150 bar
  • Recommended oil viscosity: 20–32 cSt
  • Operating temperature: –30 to +82 °C
  • Filtration: ISO 4406: 20/18/13
  • Port threads: G 1/2 (pressure), G 1/4 (drain)
  • Mounting flange: 2-bolt oval A2 flange (Ø82.5 mm pilot, 106.4 mm bolt circle)
  • Shaft types: Cylindrical Ø25 mm (torque rating 340 Nm) or SAE 6B spline (torque rating 400 Nm)
  • Seal type: High-pressure shaft seal (HPS)

Note: For continuous or high-pressure duty, external case drain lines are recommended to ensure low case pressure and extend shaft seal life. Always verify the correct shaft and seal configuration using the full model code.

Artikelnummer:
016-0549-003

Förpackningsstorlek:
1 st

Minsta beställningskvantitet:
1 st
Antal monteringshål
2

Arbetsportar
G 1/2 BSP

Axel diameter
25 mm

Axeltyp
Cyl. Ø 25 mm (10)

Bultcirkel
106.4 mm

Deplacement
200 cm3

Dimension H
163 mm

Dräneringsport
G 1/4 BSP

Filtreringskrav
ISO cleanliness code 4406:20/18/13

Flänsens styrdiameter
82.5 mm

Färg
Black

Föroreningsgrad max.
20/18/13 - ISO 4406

Ingångstryck Max.
150

Integrerad backventil
Nej

Intermittent Rotationshastighet Max.
341

Intermittent flöde Max.
68

Intermittent vridmoment Max.
324 Nm

Kont. rotation max.
286 rpm

Kontinuerligt flöde Max.
57

Längd
163 mm

Max. driftstemperatur
82 °C

Max. vridmoment på axel
340 Nm

Modell kod
XLH

Moment kontinuerlig max.
287 Nm

Monteringsfläns
SAE-A2

Märke namn
Danfoss

Oljeviskositet rekommanderad
20 - 32 cSt

Portplacering
Side

Reces
82,55 mm

Temperatur max.
+180 °C

Temperatur min.
-30 °C

Tryck intermittent max.
124 bar

Tryck kontinuerlig max.
110 bar

Typ av axeltätning
High pressure packing
Förpackningsstorlek
1 st

Streckkod
469872

Bruttovikt
Kg

Nettovikt
Kg

Ursprungsland
CHN

Intrastat artikelkod
84122981

The Danfoss XLH series is designed for medium-duty applications requiring reliable low speed and high torque. Built on the proven orbital motor principle with spool valve distribution and hydrodynamic journal bearings, these motors deliver robust performance, long service life, and a compact footprint. With SAE-A2 flange mounting, high-pressure shaft seals, and a choice of cylindrical or splined shafts, XLH motors are well suited for a wide range of mobile and industrial machinery.

Key Advantages

  • Reliable performance at low speeds
  • Compact and robust construction
  • Constant torque in both rotational directions
  • Hydrodynamic journal bearings for long life
  • High-pressure shaft seal as standard
  • Displacement range: 80 to 400 cm³
  • Max. continuous torque up to 426 Nm
  • Max. intermittent torque up to 547 Nm
  • Continuous speed capability up to 462 RPM (depending on model)

Typical Applications

  • Aerial work platforms and lifts
  • Augers, sweepers, and mixers
  • Conveyors and material handling systems
  • Agricultural machinery and implements
  • Turf care and landscaping equipment
  • Winches, auxiliary drives, and feeders

Technical Highlights

  • Inlet pressure up to 150 bar
  • Recommended oil viscosity: 20–32 cSt
  • Operating temperature: –30 to +82 °C
  • Filtration: ISO 4406: 20/18/13
  • Port threads: G 1/2 (pressure), G 1/4 (drain)
  • Mounting flange: 2-bolt oval A2 flange (Ø82.5 mm pilot, 106.4 mm bolt circle)
  • Shaft types: Cylindrical Ø25 mm (torque rating 340 Nm) or SAE 6B spline (torque rating 400 Nm)
  • Seal type: High-pressure shaft seal (HPS)

Note: For continuous or high-pressure duty, external case drain lines are recommended to ensure low case pressure and extend shaft seal life. Always verify the correct shaft and seal configuration using the full model code.